Third, maintenance
1. Maintenance is to maintain the perfect technical state of the CNC machine tool, so that it can fully play its role. In order to strengthen the maintenance strength, our company has set up an electromechanical integration group consisting of mechanical and electrical professionals in the mechanical power company to undertake the maintenance work of the company's numerical control equipment. They are composed of old technicians, masters and college students with rich professional experience, which provide a strong guarantee for the normal operation of our company's numerical control equipment.
2. Some machine tool failures are caused by unreasonable structure or improper maintenance. Timely summary of maintenance experience can provide important basis for future equipment selection and equipment management. For example, we found that the CK3263A CNC lathe is bent and deformed in the X-direction steel guide rail. After comparison and analysis, it is considered that the operation time is too long and the turret tool holder has no counterweight. It is a congenital deficiency of the machine tool, which is the future choice. The model provides a reliable basis; as in the TND360 CNC lathe we used, it was found that the tool holder was not positioned properly during the work. The tool holder was opened and the coolant inside the tool holder was found to be rusted, resulting in inaccurate motion, so the parts were processed normally. Clean the coolant and chips in a timely manner to reduce the occurrence of malfunctions.
3. Strengthen professional training and improve the technical level of maintenance personnel.
4. Make bold technical improvements to places where existing equipment often fails. For example, in our company's XH754 machining center, during the use process, it was found that the spindle was not tightly sealed, which caused the coolant to enter and corrode the spindle bearing, which seriously affected the spindle precision. (The bearing is a NSKC-class radial ball bearing in Japan, which is expensive, and each set price is about 15000 yuan.) According to technical personnel, the original spindle seal is a labyrinth seal, and the lubrication form is NBU-15 grease lubrication. And no hydraulic lubricating oil is forced to lubricate. If the sealing is not good, it will easily cause the coolant to enter the main shaft. Then, the HG4-692-67J type has a skeleton seal, and a flange is pressed at the front end of the main shaft to seal the sealing ring, so that the above problem Can be solved. However, in use, it was found that when the equipment was running for a long time, the temperature rise of the spindle was somewhat high. Because the sealing ring used a standard sealing ring and the inner hole was somewhat over-filled, we used sandpaper when replacing the sealing ring. The inner hole is slightly polished, and after installation, the sealing effect and the temperature rise of the spindle are normal.
In short, as long as skilled operation, careful maintenance, and strict management, you can fully utilize the performance of CNC equipment.
Previous page
LED Grow Lights function by sending an electric current through a semiconductor material.This in turn excites the electrons that create a powerful light from a very small bulb.By using different materials for the semiconductor, it is possible to create LED diodes with different wavelengths of light. This makes them capable of giving your indoor plants exactly what they need for each stage of growth. How those are used will be covered further down.
Full spectrum Grow Lights 600W/900W/1200W/1500W/1800W/2000W Double Chips LED Grow Lights Indoor Plants lamp for flowering and growing.
Item Display
Advtanges:
Upgraded Epistar chips,High Lumen,High penetration.
Plug with listed certificate safe to use.
The Plug you can choose
Quality Control systems
Package
Our professional full spectrum Grow Light are suitable for all the indoor plants and good for seeding, growth,flowering and fruiting stages of plants, increasing the harvest and Saving energy.
Cautions:
1.Do not use the lights in dripping water or anywhere where they will get wet, water and electricity can be a dangerous mixture
2. The working environment for the light is -20~40 degree celsius,45%RH~90%RH.
3. To protect the light, Plz cut off the power when there is a lightning strike.
4. Don`t touch or move when the light working.
Suggestions:
1.Clean the dust inside every 6 months to ensure the good heat dissipation and long life time.
2.Don`t keep too short distance to the plant canopy to avert leaves bleaching.
3. Highly hang the lamp will weaken the energy and affect the growth cycle of the plants, so the lamp should not be hang too high.
4. While taking care of the plants, please spray the leaves and branches 2-3 times everyday, to ensure the plants do not wrinkle a wither, and have no phenomenon of few fruit, and hard pericarp
Trade Terms
Payment: T/T, L/C, Paypal, 30% deposits before production, 70% balance to be paid before deliverying(Western Union are welcome)
Sample will be delivered within 7 working days.
Discounts are offered based on order quanlityes.
MOQ:sample order are acceptable
Delivery ways:DHL,UPS,FedEx,TNT, door to door,by sea,by air,etc.
Our Company
Warmly welcome to take a visit on our factory at any time and Philizon Fulll Spectrum Grow Lights are perfect for green house applications.
Full Spectrum Grow Light,High Lighting Effect Led Grow Light,High Lighting Effect Grow Light Led,High Lighting Effect Grow Light
Shenzhen Phlizon Technology Co.,Ltd. , https://www.philizon.com