Giteco introduces new ZXCT1050 current monitor

Semiconductors introduces the new ZXCT1050 current monitor. The new device features a wide range of general-mode input voltage ranges—from ground to supply voltages up to 2V—to provide accurate current measurements even in the event of a load short. The device's current output topology and extremely low bias voltage help increase functionality and can be optimized for low in-line voltage drops.
The ZXCT1050 current monitor can operate on both the high and low sides of the load, supporting dynamic output current limiting circuits for a variety of applications, from power brick to motor control circuits.
According to Li Jinhua, vice president of sales for Zetex Asia Pacific, the ZXCT1050 converts the voltage on the external sense resistor into a precise proportional output current. Because its voltage gain can be programmed (precisely set with two external resistors), designers can choose the right sense resistor value to achieve the best balance between accuracy and power dissipation.
Compared to other larger packaged devices, the ZXCT1050 current monitor has a quiescent current of ten times lower at 50μA, which helps improve overall power efficiency. The device is available in a compact SOT23-5 package and is fully specified over the extended industrial temperature range of –40oC to 125oC.

Inground Lights

Without exposing screws, the die-casting aluminum of LEDER technology`s LED inground light gives it excellent heat dissipation, prolongs its lifespan, and reaches its waterproof performance up to IP68. Humanized lighting mostly installed are lawns and undergrowth to avoid shining directly into your eyes, this inground light`s COB LED chips to shine over a 60° beam angle while the optical lens keeps the lights from dazzling your eyes.

This LED inground light features the ability to adjust the direction of the light from outside the fixture - leaving the factory seal intact. Featuring a cast brass housing that sits within a heavy-duty polymetric sleeve, it also offers silicone rubber gaskets at the lens, a potted driver, and a strain relief below, all designed to prevent water ingression.

Features:

• Sealed drive

• Modern minimalist design

• Group and control multiple lights with the smart life app

• Energy saving save electricity

• water impervious

• Color temperature :3000k-6000K

• Stainless steel frame

• Type of protection: IP20 /IP65 (Some models)

• Warranty:3 - 5 years

You can use this light where many people gather or where many activities take place. To meet different lighting needs, this light is suitable to be installed in soil, cement, stone, wood and other environments.Outdoor Shallow Inground LED Well Light round inground fixture with stainless steel finish framework, for outdoor use.

We have rich production experience in lighting. Except LED Inground Light, we also offered other product in Outdoor Lighting ,such as LED Flood Light , LED street Light , LED Inground Light, LED Spike Light ,LED Bollard Light ,LED Wall Washer,Outdoor Wall Light & step light as so on .


Inground Light,Inground Uplight,In Ground LED Lights,In Ground Up Lights

JIANGMEN LEDERLIGHT LIGHTING Co.,LTD , https://www.floodlightsled.com