Composite wood floors are one of the types of wood floors that are used in large quantities in home renovations. Many homeowners do not know much about the size of composite wood floors . Today, with the small series to see the composite wood floor size and composite wood floor composition for your reference oh.
Composite wood floor composition
1. Lacquer: Commonly used UV-lacquer, PU-lacquer etc. Adhesion of paint film is an important indicator to measure the quality of paint film. Adhesion of paint film is inspected according to the requirements of GB/T 4893.4, and a small amount of intermittent peeling is allowed at the cuts and cuts. The surface paint film has the ability to resist wear, and the surface wear resistance is an indicator to check the wear resistance of the surface paint film. The principle of testing the wear resistance of the surface is to measure the ability of the surface paint film of the product and the grinding wheel with a certain granularity to wear off and maintain the paint film after friction with each other for a certain number of revolutions.
2, surface layer: solid wood composite floor surface layer is often decorated veneer or puzzle, mostly birch, beech, maple, cherry, etc. are expensive species;
The common thickness specifications are: 0.3mm, 0.6mm, 1.0mm, 1.2mm, 1.5mm, 2.0mm, 4.0mm.
Three-layer engineered wood flooring (three layers: fine hardwood layer with a surface of 3-5 mm)
Multi-layer solid wood composite flooring (precise solid wood surface with 0.3-0.5 mm surface, other over 7 layers of criss-crossed hybrid wood);
3, substrate: solid wood composite floor composition is a special plywood substrate, the general material for the miscellaneous, birch and so on. The special plywood is not lower than the technical requirements of GB/T 9846.1-9846.12 and GB/T 13009 second-class products. At the same time, the substrate must be strictly selected and processed as necessary, and defects that will affect the quality of the decorative surface cannot be left.
4, the bottom layer: solid wood flooring flooring composition of the bottom material is generally miscellaneous, birch and so on. The common specification thickness is 2.0mm.
Through the above you may also understand that in these two, it is obvious that the three-tier, apparently fine-grained trees are much higher than the multi-layer thickness, so this type of floor is a high-end floor.
However, if there are more than seven floors, whether it is the 9th floor or the 11th floor, the relative cost is much lower, so it is the middle and low end.
Composite wood floor size
Composite wood floor size (solid wood multi-floor specifications) are generally: 1802 × 303 × 15 (12) mm, 1802 × 150 × 15mm, 1200 × 150 × 15mm and 800 × 20 × 15mm and so on.
When consumers purchase flooring, they must pay attention to the size of the composite wood floor (solid wood multi-floor specifications), which is also an important channel to judge the quality of solid wood flooring. The floor brands of regular manufacturers do not cut corners on composite wood flooring (solid wood multi-floor specifications).
Information on the dimensions of composite wood flooring was introduced here for everyone. I hope this article will be helpful to everyone. If you still have something you don't understand, you can leave a message to Xiaobian at the bottom. We will answer your questions as soon as possible.
Wooden floor
Rain Shower Head with Handheld Shower Faucet Set Complete with High Pressure.Includes one-piece cartridge to simplify installation and maintenance.Our shower system provides free replacement parts in 5 years.
Shower Faucet,Shower Handle,Shower Diverter Valve,Delta Shower
HESHAN CAIZUN SANITRAYWARE CO.,LTD , https://www.caizunsanitaryware.com