The quality of the tiles is the focus of the renovation. If the quality is not enough, not only will it cause trouble to the decoration, but it will also affect the life of the owners. Therefore, when choosing the quality of tiles, you must not be sloppy. So how do you pick a tile ? How to check the quality of ceramic tiles? Let's take a look with Xiaobian.
How to choose a tile
The quality of ceramic tiles mainly depends on the treatment of ceramics and glazes. The size of the ceramic tile should be uniform and uniform, and the thickness of the ceramic tile should be uniform. The difference between the thickness and size of the ceramic tile of the same specification should not exceed 2 mm. The quality of the glazed surface is more critical.
A look: whether the tile glazed surface is thick and smooth, with or without defects such as scratches, stains, missing corners, etc., with no bumps, knobs, etc., and the edges are straight and flat with no particles, and the other pattern is delicate. There are different shades of color.
Listen to the sound: clip a corner of the tile with your finger and hang it down easily. Tap the lower part of the tile with your other hand. If the sound is crisp, then verify that the tile contains a high amount of porcelain. If the sound is dumb and dull, prove that the amount of porcelain is low.
Sanhe: For the high density, high hardness of the antique brick, you can feel the brick's sense of heavyness with your hands. On the other hand, after the bricks with relatively low density are weighed by hand, there will be a kind of floating feeling. When this antique brick is used for indoor flooring, durability will be greatly reduced.
Four strokes: Scribe is for tiles that have glazed surfaces. The surface of the brick is carved with a hard object. If there are obvious scratches, the hardness of the surface tile and the quality of the glaze are insufficient. For indoor homes, filth will accumulate over time, making it difficult to manage.
Five cuts: cut out the tiles (you can ask the store for debris) and see the breaks. The fracture is fine, hard and brittle, and the color is consistent with the top grade.
Six water: The water droplets are on the back of the tile. After the water is scattered and slowly infiltrated, it indicates that the tile density is high and it is regarded as top grade.
Method for verifying the quality of tiles
1. The outer packaging is firm, with specifications, color numbers, codes, production dates, and site information.
2. The internal brick and brick are neatly arranged and have a protective film to prevent cracking.
3, randomly check the tiles, glaze surface, texture, pattern consistent.
4, the two tiles on the back of the match, contact tight, uniform.
5. Draw out a piece of ceramic tile and place it on a flat countertop.
6, tap the tile with a hard object, sound crisp.
7, hand rub tiles, not easy to break.
The above methods on how to select tiles and check the quality of tiles are shared with you here. I hope to help you! For more information, please visit this website. Stay tuned.
Tile Tiles to buy
Ceramic bearing under [SEALMANN" trademark, adopts advanced ceramic processing technology and
can provide ceramic bearings in various materials, which are widely used in mechanical facilities like
magnetic drive pumps, canned motor pumps, multistage pumps, submersible pump, chemical pumps,
centrifuges and valves etc.
We can develop various bearings of high-parameter, high-precision & high-performance in different
ceramic materials and carbon as specified by customers.
Mechanical Shaft Seal,Silicon Carbide Shaft,Reaction-Bound Silicon Carbide,Silicon Carbide Graphite Crucible
Ningbo FLK Technology Co., Ltd. , https://www.flk-global.com