All-weather breathing valve overview: All-weather breathing valve is mainly used for oil and liquid tank, to exclude positive and negative pressure gas tank, so that the liquid inside the tank easy to access. There are certain obstacles, tank deformation and vibration may occur, the product design is reasonable, simple structure, easy to use; is an essential product of the tank, indispensable. All-weather breathing valve performance and features: 1. The new all-weather breathing valve housing made of cast iron, cast steel and aluminum alloy, good corrosion resistance; 2. The valve tray with PTFE material, low temperature, antifreeze performance; 3. Simple structure , Easy maintenance, safe and convenient; 4. The new all-weather breathing valve performance in full compliance with the Ministry of Petroleum Industry standard SY7511-87. All-weather breathing valve range: The new all-weather breathing valve for storing flash point below 28 ℃ Class A oil and flash point of less than 60 ℃ of B oil products, such as gasoline, stupid, a stupid, kerosene, light diesel oil , Oil, oil and other oil products and the nature of the chemical storage tanks. Can be used with the new corrugated flame arrester. All-weather breathing valve instructions: The breathing valve is installed at the top of the tank, is to solve the positive pressure tank, negative pressure gas, so that the liquid inside the tank is not hindered access, when the external liquid into the tank when a large number of gas out (Called positive pressure). If the tank liquid output when the tank must be drawn into the tank from the outside air (called negative pressure). Stop breathing when the valve is automatically closed will not leak the liquid gas tank, so that the liquid inside the tank has been a good guarantee. All-weather Breathing Valve Maintenance and Service: In order to use safety Breathing Valve, check the guide bar and valve disc before use is flexible. This valve should be regularly (within 6 months) check the positive and negative valve disc is flexible, valve disc contact surface for damage, if damaged should be overhaul immediately. After maintenance, everything is normal and can be reused.
In this catalog, we mainly introduce the 8mm Red Through-hole LED.
8mm Through-hole LED, we supply 8mm red LED with water clear lens, 8mm red LED with diffused lens, 8mm red LED with red clear lens and 8mm red LED with red diffused lens.
8mm Red Through-hole LED widely used for Red sign, display LED, indicator LED, die hole LED and 8mm round red with lamp holder because of the high brightness and the big size.
For the pin of 8mm red through-hole LED, we also have a lots of choice on it. For example: 8mm Red Through-hole LED flat pin, 8mm Red Through-hole LED curved pin, 8mm Red Through-hole LED braided pin ect.
For the bringhtness of 8mm red through-hole LED, we have three level: common bright 8mm red through-hole LED, super bright 8mm red through-hole LED and ultra bright 8mm red through-hole LED.
For the angle of 8mm red through-hole LED, 15 degrees, 30 degrees, 45 degrees, 60 degrees, 120 degrees are available.
8mm Red Through-hole LED(DIP LED) manufacturer from China.
We supply kinds of 8mm Through-hole LED with different wavelength from 365nm to 1550nm, which include the visible LED and the invisible LED.In this catalog, we mainly introduce the 8mm Red Through-hole LED.
8mm Through-hole LED, we supply 8mm red LED with water clear lens, 8mm red LED with diffused lens, 8mm red LED with red clear lens and 8mm red LED with red diffused lens.
8mm Red Through-hole LED widely used for Red sign, display LED, indicator LED, die hole LED and 8mm round red with lamp holder because of the high brightness and the big size.
For the pin of 8mm red through-hole LED, we also have a lots of choice on it. For example: 8mm Red Through-hole LED flat pin, 8mm Red Through-hole LED curved pin, 8mm Red Through-hole LED braided pin ect.
For the bringhtness of 8mm red through-hole LED, we have three level: common bright 8mm red through-hole LED, super bright 8mm red through-hole LED and ultra bright 8mm red through-hole LED.
For the angle of 8mm red through-hole LED, 15 degrees, 30 degrees, 45 degrees, 60 degrees, 120 degrees are available.
For the raw materials, we use the LED chip from Taiwan Epistar, Tyntek, Optotech. The stability of our products have been recognized by all of our custom.
All of our product are meet with Reach, CE, RoSH, SGS, EN62471 standards and have 5 years warranty.
8mm Red Through-Hole LED, mini red led bulb, Red mini LED bulb, 8mm red LED, Red 8mm LED
Shenzhen Best LED Opto-electronic Co.,Ltd / BESTSMD CO LIMITED(HK) , https://www.bestsmd.com