FXMD-S three defense lighting power distribution box maintenance instructions

FXMD-S three-proof lighting power distribution box equipment reliability is very important. During operation, preventive maintenance should be performed to prevent explosions and to avoid loss of production equipment. Therefore, when repairing, parts made of qualified materials must be installed in the correct way. The repair procedure itself should not pose a risk of fire and explosion. For welding and cutting, in order to reduce the risk of fire, local factories should obtain relevant permits. No matter what kind of problems occur in the explosion-proof control cabinet, it must be inspected and repaired by professionals. The explosion-proof control cabinet must undergo a comprehensive inspection every quarter. Especially when the explosion-proof control cabinet is in a humid environment or an environment where the temperature difference changes greatly, the inspection should be carried out in a shorter time.

First, the impact of various changes in design and structural materials on safety should be carefully examined. Second, the consequences of these changes on the entire installation should be valued. Subtle changes on the surface can create unimaginable and unallowable explosion hazards. Examine the explosion-proof control cabinet in all aspects: whether the shell and handle are cracked or damaged; whether the protective grounding or connecting the zero line is correct, solid and reliable; whether the soft cable or cord is intact; whether the plug is intact; whether the switching action is normal and flexible Whether there is defect or rupture, whether the electrical protection device is in good condition, whether the mechanical protection device is in good condition, and whether the rotating part of the tool is flexible and unobstructed. When the explosion-proof control cabinet is not used for a long time, its insulation resistance must be measured before the next use.

If the insulation resistance is less than the specified value, it must be dried and repaired. After passing the inspection again, it can be used for the next time. When repairing, pay attention to whether it is the insulation gasket or sleeve in the explosion-proof control cabinet. And so on, shall not be arbitrarily removed or exchanged, missing equipment, etc.; after the electrical insulation part of the explosion-proof control cabinet is repaired, it must be measured or tested again, and it can be used only after passing the test.

FXMD-S three-proof lighting power distribution box due to prolonged use of explosion-proof doors and explosion-proof distribution box does not match the situation, whether it is stainless steel, steel plate material, plastic, these materials have their own memory, if used in the process Applying an external force to it for a long time causes the explosion-proof door to be deformed, which leads to a decrease in the explosion-proof performance of the explosion-proof distribution box. First of all, close all the electrical equipment connected by the distribution box, and remove the outside line of this explosion-proof distribution box. Remove all the lines and mark the corresponding position. Use insulated tape around the exposed wires. Then turn off the explosion-proof door that has been deformed to see if the explosion-proof door of the explosion-proof distribution box is seriously deformed. If the deformation direction can be repaired by using some tools, repair it by yourself. If it cannot be repaired, send it back to the production unit. Let it fix.

Led Grow Lights For Herbs

We have full spectrum LED cannabis grow lights for a multitude of applications including: urban farming, hobbyist growing, aquariums, animal cages or environments and even happy lights! These lights are versatile and easy to use for all of your organic needs.

LED Grow Lights are very popular among cannabis growers as an alternative to HPS grow lights. They tend to run cooler and also usually come with built-in cooling. They can often be plugged into a wall and simply hung over plants which is definitely easier than setting up an HID Grow Light. LEDs also have great penetration so they don't need to be moved frequently like fluorescents.

Main Features:

Upgraded Epistar chips,High Lumen,High penetration.

IR LED involved,it is not as bright as other leds,But promote the yield.

Plug with listed certificate safe to use.

Item Display

The Plug of LED Grow Lights you can use

Application:

Ideal for all phases of plant growth, and works well with water solution culture and soil culture.Can be used in house garden,pot culture,sowing, breeding farm,flower exhibition,bonsai garden,green house,sowing farm,greenhouse cultivation,water soluble breeding, pipeline cultivation and so on.

Quality Control systems and after-sales

Package

Philizon have over 6 years' experience in designing and manufacturing led grow lights. Persuiting to offer the best grow lights for plants growth, we cooperate with the scientific research institutes and the Academies of Agricultural Sciences in USA, Australia anada, UK and so on.A great number of commercial plant growers test the lights, and their feedbacks show that this lamp owns a lot of 640nm,660nm and 740nm lights, which gives the plants enough nutrient in the flowering and fruiting phase and bring a far higher yield than other led grow lights in the market.

Trade Terms

Payment: T/T, L/C, Paypal, 30% deposits before production, 70% balance to be paid before deliverying(Western Union are welcome)

Sample will be delivered within 7 working days.

Discounts are offered based on order quanlityes.

MOQ:sample order are acceptable

Delivery ways:DHL,UPS,FedEx,TNT, door to door,by sea,by air,etc.

Led Grow Lights For Herb,Led Grow Light,Double Chips Led Grow Lights,2000W Led Grow Light

Shenzhen Phlizon Technology Co.,Ltd. , https://www.szledplantgrowlights.com