I believe that many owners will face this aspect of decoration. The first step in the renovation is to brush the wall. Because there are so many kinds of products on the market, many owners don’t know how to choose, so many people buy things directly. After the self-modulation, how to adjust the putty powder? What are the precautions? Next, let Xiaobian bring everyone to understand the basic steps of how to adjust the putty powder .
First, how to adjust the putty powder
1. Prepare a suitable electric mixing vessel and clean the container while preparing a low-speed, high-power electric mixer.
2. When mixing, first add a certain amount of water, then pour the putty powder for stirring. Generally, the specific gravity of putty powder and water is 1:0.5. (Generally use water-resistant putty, just stir with water. If you buy the putty powder when you need to add water glue, it is not water-resistant putty powder.
3. The non-water-resistant putty is added with formaldehyde-containing glue, which is not suitable for use in home decoration. You should pay attention when purchasing.
4. Reasonable stirring is very important. The putty powder should not be too dry. If it is too dry, the additives in the putty powder are not easily dissolved, and the adhesion will be affected. The cracking of the putty layer is likely to occur in the later stage. Excessive putty pulp is easy to waste during the painting process.
5. Allow to stand for 15-20 minutes after stirring. This process is to dissolve the additives of the putty powder. You can use the putty board to stir, then pick a little putty pulp on the putty board, turn the board back, the putty pulp will not fall down, indicating that the quality of the putty powder is good, otherwise the quality is worse.
Second, how to adjust the putty powder
1. When storing, pay attention to waterproof and moisture proof. The storage period is six months. 2. The construction temperature is above 0 °C. After the putty powder is adjusted into a paste, it should be used within 4-5 hours to avoid excessive deterioration. 3. The putty powder produced by different companies should not be used on the same construction surface as other putty to avoid chemical reaction and chromatic aberration.
2. It should be noted that the stirred putty pulp should not be too dry, because the additive in the putty powder is not easy to be fully dissolved, the adhesion will be affected, and the putty is easy to be caused in the later use. Cracking of the layer. And the putty pulp can not be too thin, too thin putty pulp is easy to waste in the process of painting. So everyone must pay attention when mixing.
3. Finally, after the putty is fully stirred, it should be allowed to stand for 15-20 minutes. This process is to dissolve the additives in the putty powder. Here Xiaobian can teach you a good way to identify the putty powder, that is to stir with the putty board, then pick a little putty on the putty board, turn the board back, the putty pulp will not fall, then It means that everyone buys good quality putty, and vice versa is a little putty.
Through the above content, I believe that everyone has a certain understanding, I hope that can help everyone, in this small series of loyal thanks to each reader's reading, your reading gives us the greatest support and motivation. If you want to know more, please continue to pay attention to the decoration home network.
More related wonderful reading:
Is the putty powder poisonous? Putty powder analysis and brand recommendation
What are the brands of putty powder? Putty powder purchase tips
Which is better for exterior wall putty powder? Top ten putty powder introduction
What are the wood putty formulas? Classification of putty powder
What are the types of paint putty powder? Paint putty powder brand
Chipboard Table Top,Particle Board Table Top,Furniture Table Top,Melamine Faced Chipboard Table Top
Changzhou Offistyle Furniture Co., Ltd. , https://www.offistylefurniture.com