NSK tapered hole bearing disassembly method

Source: Bearing network time: 2018-01-27

/*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089';

Disassemble the smaller type of adapter sleeve bearing; support the inner ring with the stopper fastened to the shaft; loosen the nut; pad the pad; then use the hammer to hit the bushing to disassemble.
Large bearing; it is more and more simple to use hydraulic disassembly; pressurize oil supply in the oil hole on the cone shaft; make the inner ring swell; disassemble the bearing. Avoid the bearing falling during operation; also use hydraulic nut to open the lining set.

Recommend to friends comments close window

Bearing related knowledge

Noise caused by bearing manufacturing factors and its countermeasures
Two kinds of grinding methods for IKO tapered roller bearings
NSK bearing error analysis bearing shape scale

This article links to http://
Please indicate China Bearing Network http://

Previous:Summary of the rear-end code of NSK bearing clarifies the next series: key skills in bearing production

Toyota Series

OEM 33038-37030 SYN Ring, OEM Synchronizer Cone, Toyota Synchronizer Ring, Hiace Gearbox Spare Part

ShaoXing Change Auto Synchronizer Ring Co.,Ltd , https://www.sxcjautoparts.com