How is the design of the self-made attic staircase? It must have a reasonable structural design. According to the standard, the height of each step of the stairs should be high and the width is required. The designer is required to have a thorough understanding and mastery of the dimensions in order to make the design of the stairs. It is convenient to walk and takes up the least space. Let’s take a look at the top floor attic staircase design with the decoration home decoration network.
First, the principle of the top floor attic staircase design
1. The noise should be small.
The stairs are not only robust, safe, and beautiful. They should not announce excessive noise when they are used.
2. Use environmental protection materials.
Just as furniture is made up of the same information, the “family†of stairs is also made up of “dataâ€. For example, the steps of solid wood are to pass the paint process.
3. Eliminate sharp angles.
All parts of the stairs should be lubricated, rounded, and have no outstanding, sharp parts to avoid unintentional injury to the user.
4, the handrails should pay attention to the cold and warm. The use of metal as the handrail of the stairway requires manufacturers to deal with the appearance of the metal, especially in the north, the cold feeling of the metal in winter, which makes people particularly uncomfortable.
5. Construction should be convenient and convenient.
Select the stairs and choose the installation method of the stairs. Convenient and convenient devices will make sense for you and the neighborhood. Convenient device methods reduce noise and dust to a low level during the device. In addition, the stairs that need to be welded have safety hazards during the installation process, and the smell and dust are also pollution to the home environment.
Second, the top floor attic staircase design considerations
1. In order to avoid the illusion when going up and down the stairs, the height of the first step and the last step of the stairs should be consistent with other levels. If you need to change it, it should be controlled within 4 cm, preferably no more than 2 cm to 3 cm.
2, the highest step of the stairs to the height of the ceiling, need to have a clearance of more than two meters, the minimum is not less than 1.8 meters. Otherwise it will create a sense of oppression.
3, railing distance: the distance between the center of the two railings is 8 cm, not more than 12.5 cm, so as not to let the children stick their head out of the gap.
4, the height of the armrest: to the waist position, 85 ~ 90 cm, the armrest diameter is 5 cm as well.
5. Step height and depth: The step height should be 15~18 cm, and the step depth is 22~27 cm. The order is about 15 steps. If it is too high, you may need to set up a stair rest platform.
6, the width of the stairs: when the side is empty, the net width is not less than 75 cm; when there are walls on both sides, the net width is not less than 90 cm.
7. Safety: Stair parts should be smooth and round, with no protruding or sharp parts. For families with children, the slope of the stairs should be slow and the angle of rotation should not be too large; the stair steps should be anti-slip measures, such as anti-slip strips, anti-slip mats, anti-slip grooves, etc.
I would like to introduce you to the information about how to design a self-propelled attic staircase and pay attention to the design of the stairs. I hope this article will help you. If you still have something you don't understand, you can leave a message to the editor below, we will answer you as soon as possible. If you want to know more about decoration, please continue to pay attention to the decoration home network.
More related wonderful reading:
Interior Loft Stair Design Specification Interior Loft Staircase Decoration Notice
Attic staircase decoration design considerations, staircase design principles
Benefits of home loft stairs, installation considerations
How to design an attic staircase? Benefits of loft stairs design
Attic staircase decoration materials attic staircase decoration precautions
Al2O3 ceramics: high alumina content, compact structure, special properties, it is called special ceramics. The Al2O3. ceramic material is a close-packed hexagonal structure composed of oxygen ions, and the aluminum ions are filled in two-thirds of the octahedral gap, which is the same stable α-Al2O3 structure as natural corundum, so the ceramic has a high melting point and high Hardness and excellent wear resistance. Ceramic patch hardness ≥ HRA85, second only to the hardness of diamond, and the surface smooth friction coefficient is small, the wear resistance is very good, especially in high temperature oxidizing medium or corrosive medium, the performance of ceramic patch material compared with other metal materials More superior.
Alumina Ceramic Disk,95% Alumina Ceramic Disk,Round Alumina Disk Structural,Alumina Zirconia Ceramic Disk
Dongguan Haikun New Material Co., Ltd. , https://www.hkceram.com