One of the most important steps in the construction process is the tiling. The usage rate of floor tiles is very high, and it will be more environmentally friendly than floorboards. However, during the construction of floor tiles, there will be gaps in the floor tiles. With the increasing number of modern decoration materials, the frequency of use of floor tiles and grouts will increase. Also increasing. At this time we may ask how to do floor tile seams ? Today Xiao Bian also collected a lot of information in this regard. There are also some considerations for the beauty of the paving tiles. Let's get to know it together.
First, how to do the floor tile seam
Step 1: Before starting to lay tiles, pre-paving should be done, and the gap between tiles and tiles should be reserved, generally 1 to 6 mm wide, and 1 to 2 mm deep. The smaller the gap is, the more beautiful the effect is. With the wider gap, the overall space on the ground is very three-dimensional, vivid and rich. However, the size needs to be determined based on the experience of the master of the mud. It is recommended that the owners choose an experienced master to tile the tiles.
Step 2: Before the construction, the gaps between the floor tiles need to be cleaned of dust and debris. You can use a vacuum cleaner to clean them, or use a broom to clean them, so that the tiles are dry, no dust, and no debris. It is not prone to uneven ground or empty drums.
Step 3: Need to be caulked first, then do beautiful floor tile seams. First, use white cement products to make joints. After construction, use professional tools to press and smooth the cement on the tile surface; during construction, the gap depth should be about 1 mm; after the joints are filled, white cement must be thoroughly dried. Only beautiful construction can be applied, but in the early stage of construction, the dust on the tile surface needs to be removed.
Step 4: The next step is to prepare the glue. First, we need to wet the floor tiles between the crevices. It is worth noting that the crevices need to be kept clean and dry. Laying a beautiful texture paper, squeeze the glue in the gap in the tile, after the construction is completed, and then scrape flat, without glue dry thoroughly, tear off the textured paper.
Step 5: After the glue is dried, wipe off excess glue or remove it, or use a sponge to scrub. You can start with the corners of the floor tiles or place the furniture area to avoid starting construction.
Second, the floor tiles US seam construction precautions
1. During the construction of the floor tiles, a vacuum cleaner can be placed to clean the dust at any time and keep the floor dry. The glue on the ground does not dry out, the shoes are easily stained.
2. After making a perfect seam, you need to set aside a good amount of time. Usually it takes one day to stay. If it is winter, it takes one to two days to ensure that the ground is completely dry.
3. It is recommended that the construction be carried out after the wasteland cleaning stage, so as to avoid the dust and impurities brought about when the space is cleaned from affecting the appearance of the ground.
Xiao Bian summary: The above is a small series of finishing some of the relevant knowledge on how to do the floor tile seam , through the above description is not difficult to find the joints, caulking, and the United States are all technical skills, in order to make the entire ground flat and small series It is suggested that all owners should ask experienced masters to apply for construction. If you want to learn more about the decoration information, you can pay attention to this website or visit our offline experience hall.
How to do the United States and the United States tile beautiful sewing seam floor tile
Razor Barbed Wire,Razor Wire Fence,Flat Razor Wire,Razor Ribbon Wire
Shenzhou City Hongda Hardware Products Co.,Ltd , https://www.galvanziedwire.com