There are many varieties of steam flowmeters, and the main measurement results are mainly vortex flowmeters and elbow flowmeters. The vortex flowmeter is mainly used for the measurement of steam pipes with a pipe diameter below DN300. The elbow flow meter can be used for the measurement of pipes below DN300 and above.
There are many varieties of steam flowmeters, and the main measurement results are mainly vortex flowmeters and elbow flowmeters. The vortex flowmeter is mainly used for the measurement of steam pipes with a pipe diameter below DN300. The elbow flow meter can be used for the measurement of pipes below DN300 and above.
Selection of steam flow meter: The selection of flow meter is related to whether the meter can accurately measure. Therefore, the selection is a middle priority. It is required that the flowmeter manufacturer and the user procurement personnel must put the accuracy of the measurement into the primary consideration. It turns out that most of the measurement inaccuracy and the flowmeter failure are directly related to the product selection. Relationship.
What parameters should be known when selecting a steam flow meter: the temperature of the steam to be supplied by the user, the pressure of the steam, the diameter of the steam pipe, the minimum flow of steam, the flow rate of the common flow, the maximum flow rate, the distribution of the steam pipe, the number of pipes, and the steam used by the pipe. The situation, the vibration of the pipeline, the straight pipe section before and after the flowmeter installation position, the front and rear position of the valve, the steam condition of the equipment, the on-site interference, the steam time, the steam cycle, etc.
What parameters should be known when selecting a steam flow meter: the minimum flow of steam and the diameter of the steam pipe are two important parameters. These two parameters determine what flow meter can be used to meet the measurement requirements.
As a flowmeter manufacturer, the primary consideration is the measurement accuracy problem, and the bend and vortex can meet the measurement requirements of class 1.0.
Vortex flowmeter is used for the advantages of pipelines below DN300: the accuracy is fully satisfied, no need to support a variety of instruments, the temperature and pressure gauges and vortex flowmeters are integrated into one, easy to install, reducing the trouble of troubleshooting, saving Costs also prevent the use of some improper means to steal steam.
The advantages of large diameter and small diameter of the elbow flowmeter: the accuracy is fully satisfied, the elbow sensor is installed once, and it is not necessary to replace it later. Only the supporting instruments will be replaced in the later stage, and the replacement of the supporting instruments will not affect the safety production. Http://
Http://news.chinawj.com.cn Editor: (Hardware Business Network Information Center) http://news.chinawj.com.cn
Gearbox Assembly,Automobile Gearbox,Transmission Gearbox,Manual Gearbox
ShaoXing Change Auto Synchronizer Ring Co.,Ltd , https://www.sxcjautoparts.com