Paint is an important material, and the coating can be more waterproof and waterproof when it is used for waterproofing. Then when the company is waterproofing, choose the top ten brands of waterproof coatings?
Waterproof coating 1: acrylic coating
The biggest feature of acrylic acid is that it can be diluted with water. It is a water-soluble material, colorless and odorless. It has considerable elasticity and ductility after conjunctiva. It is an extremely dense waterproof material. This material does not break with the settlement and dislocation of the base layer, and the price is moderate, which is the first choice for home decoration waterproof materials.
Waterproof coating 2: polymer cement waterproof coating
Polymer cement waterproof coating is a waterproof coating made of synthetic polymer emulsion and various additives and powders. It is a waterproof material with softness and softness. This kind of material is environmentally friendly and fast drying, but it is necessary to strictly guide the proportion of liquid materials and powder materials according to the instructions, otherwise it will reduce the material properties.
Waterproof coating three: polyurethane coating
Polyurethane coatings are known as "liquid rubber" and are one of the best waterproof coatings at present. The coating film is tough, has high tensile strength, good elongation, corrosion resistance, strong resistance to structural deformation and deformation, and has a long service life.
Waterproof coating four: mortar waterproof coating
The mortar type waterproof coating is an aqueous waterproof mortar prepared by mixing a certain proportion of acrylate emulsion with special cement, additives and filler. This kind of paint belongs to the top ten brands of water-based waterproof materials. It is non-toxic and harmless. It can be directly applied to the concrete surface and firmly adhered. The construction is convenient, it is not limited by the moisture content of the base layer, the setting time is short, and the drying is fast. After two hours of construction, it is Tiles can be applied to the surface, but since this type of material is a rigid waterproof coating, it lacks elasticity after film formation, which will affect the waterproof effect with the settlement and dislocation of the building.
The use of waterproof coatings is mainly to enhance the waterproof effect of the project, and the waterproof coatings of different materials have different properties. When using it, there should be a choice to add.
A ballcock (also balltap or float valve) is a mechanism or machine for filling water tanks, such as those found in flush toilets, while avoiding overflow and (in the event of low water pressure) backflow. The modern ballcock was invented by José Antonio de Alzate y RamÃrez, a Mexican priest and scientist, who described the device in 1790 in the Gaceta de Literatura Méxicana.[1] It consists of a valve connected to a hollow sealed float by means of a lever, mounted near the top of the tank. The float is often ball-shaped, hence the name ballcock. The valve is connected to the incoming water supply, and is opened and closed by the lever which has the float mounted on the end. When the water level rises, the float rises with it; once it rises to a pre-set level, the mechanism forces the lever to close the valve and shut off the water flow. This is an example of negative feedback and of proportional control.
Ball Cock, Brass Ball Bibcock, Ballcock Valve, Toilet Ballcock Valve
ZHEJIANG KINGSIR VALVE CO., LTD. , https://www.kingsirvalves.com