Core Tip: Original wood door process: First of all, in the wood processing process, the horizontal and vertical side material blocking plate must be chamfered inside and outside, to prepare technically for the reserved process seam. Secondly, after the carpentry has made the product into a semi-finished product, the product parts are completely sealed to prevent moisture.
Original wood door production process:
First of all, in the process of wood processing, the horizontal and vertical side material blocking plates must be chamfered inside and outside, and technical preparations are reserved for the reserved process seams;
Secondly, after the woodworker manufactures the product into a semi-finished product, the product parts are completely sealed to prevent moisture, so that the problem of cracking and shrinkage can be solved;
Once again, all the wooden bolts must be glued to strengthen the door leaf and prevent the door leaf from dislocating;
Finally, in order to extend the life of the wooden door, the glass door glue is applied to the horizontal and vertical groove of the door leaf. This method can achieve shockproof, soundproof, drooping and loosening.
According to the above process, the 98% of the original wooden door produced will not crack, shrink, sag, fall off and so on. Therefore, when the consumer chooses the original wooden door, the process can be used to consider the selected wooden door.
Concerned about surprises
Label: original wood door production process
Previous: Factors affecting the crushing process of ore Next: Picking accessories hardware quality is stressful
Zhejaing Sealand Technology Co., Ltd. is a trustworthy manufacturer of Mass Flow Meter, Mass Flowmeter, Mass Meter, Flow Meter, Flowmeter, ATEX, IECEx & CE approved. The product range covers different size from DN03 to DN150, and bigger sizes are being developed.
Sealand mass flow meter is designed and produced according to world`s latest Coriolis technology with exelent appearance, stability and accuracy to measure mass flow rate of a fluid traveling through a tube, widely applied to alternative energy, oil & gas, chemical, food & beverage, industrial energy, marine, power, pulp & paper, water & wastewater industries, etc.
Mass flow meter measures the mass based on Coriolis effort. The operating principle involves inducing a vibration of the tube through which the fluid passes. The vibration, though not completely circular, provides the rotating reference frame that gives rise to the Coriolis effect. While specific methods vary according to the design of the flow meter, sensors monitor and analyze changes in frequency, phase shift & amplitude of the vibrating flow tubes. The changes observed represent the mass flow rate and density of the fluid.
Mass Flow Meter, Mass Flowmeter, Mass Meter, Flow Meter, Flowmeter
Zhejiang Sealand Technology Co., Ltd. , https://www.sealandflowmeter.com