Hot oil removal motor bearing precautions

Source: China Bearing Network Time: 2014-08-08

/*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089';

Because it is used for a long time; soft dry oil or anti-rust cream hardened bearing; should be immersed in hot oil of 100 Â° C ~ 200 Â° C; clamp the bearing with pliers; use brush to clean the oil on the bearing. Soft dry oil or anti-proof The rust paste is heated to 100 Â° C ~ 200 Â° C to melt; very simple to wash out from the gap of the bearing. Sometimes as long as the bearing shakes repeatedly in the oil. Oil will also flow away from the gap.
When removing the centripetal spherical bearing of the old motor or the imported motor; the ball, the bead frame and the inner ring should be laterally turned out from the outer ring and then immersed in the hot oil; the roller should also be removed when the short cylindrical roller bearing is removed. , the bead frame, the inner ring and the outer ring are separated.
When hot oil is removed; the temperature of the oil should not exceed 20 Â°C.

Recommend to friends comments close window

Bearing related knowledge

The basic layout of the deep groove ball bearing and its good and bad analysis coating skills: the new process of anti-rust between the fine bearing process, the maintenance of the bearing steel metallurgy, the bearing, the shaft and the shell, the cooperation of the bearing parts, the appearance of the surface strengthening and heat treatment field

This article links to http://
Please indicate the bearing network http://

Previous:The trick of the deep groove ball bearing device is the next one: the process paper for the production of rolling bearing parts

Single Screw And Barrel For Extruder

Zhoushan Dinghai Jinsheng Bimetallic Plastic Machinery Factory (General Partners) , https://www.jinshenggalloy.com