Crane network technicians briefly describe the failure analysis of the gantry crane brake failure. The crane will encounter some problems during the operation. Our technicians will answer the gantry crane fault. Briefly describe the failure analysis of the gantry crane brake failure. The crane net technician briefly describes the failure analysis of the gantry crane brake failure. The crane will encounter some problems during the operation. Our technicians will answer the gantry crane fault.
During the rotary operation, the brake failure can cause the limit torque limiter to slip when it does not reach its design resistance torque when the rotary worm gear reduction box is disassembled.
(1) Reason analysis: In actual operation, the gantry crane rotates and starts to brake very frequently, so that the friction disc of the torque limiter and the cone surface of the worm wheel sleeve often have relative motion and wear, and the upper and lower friction discs gradually close together along the worm cone surface. Since the intersection of the upper and lower cone surfaces of the worm wheel sleeve is an angle and the diameter is smaller than the diameter of the small end of the friction disc, the annular boss is ground on the inner surface of the worm wheel, and the pressing force generated by the compression spring is used. It is shared by the conical surface and the annular boss plane. When the pressing force of the annular boss plane is dominant, the above-mentioned fault occurs when the frictional arm of the convex plane is short and the friction surface is small, so that the friction torque is reduced and less than the original design torque.
(2) Exclusion method: disassemble the rotating worm gear reducer, remove the worm wheel, and remove the annular boss on the inner cone surface of the worm wheel, so that the intersection of the two cone faces of the worm wheel sleeve is a transitional cylindrical surface, and the cylindrical surface The diameter is slightly larger than the diameter of the small end of the friction disc. Http://news.chinawj.com.cn Editor: (Hardware Business Network Information Center) http://news.chinawj.com.cn
Product Features
1. The product is easy to open and close, which can effectively seal deep well plates, sample tubes, etc., which is convenient for operation and saves time.
2. Good airtightness can prevent the volatilization of various solvents.
3. Tolerate a wide temperature range, suitable for various experiments.
4. Resistant to chemical corrosion and used for low-temperature storage.
5. The pre-opened silica gel lid allows the Pipette tip or probe to enter the hole without damaging the lid.
6. After the third party inspection, no RNA/DNA enzyme contamination
7. It can be used on automated machines, and the product size conforms to the SBS standard
8. It can be used with stickers, silica gel, and sealed without leakage. 96 round-hole silica gel and 8-hole silica gel strip with matching sealing plate
9. Good flatness, can be transported long distance after sealing with heat sealing film
10. The products are produced and packaged in a 100,000-class dust-free workshop, and the product quality is stable
11. Alphabetical sorting and cut corner marking make the storage and collection of samples more convenient and faster.
12. Each package has an independent article number and batch number identification, which is convenient for quality tracking and traceability
Film Seals,Sealing Film For PCR Plates,Sealing Film QPCR,96 Well Plate Sealing Film,Silicone Sealing Mat
Yong Yue Medical Technology(Kunshan) Co.,Ltd , https://www.yonyue.com