Analysis of the data function of the ferrule and the roll

Source: China Bearing Network Time: 2013-09-16

/*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089';

[Daily reading] Rolling bearing ferrule and roll body; one side repeatedly accepts high touch pressure; one side carries the rollover touch with the slide. The holder is on one side with the ferrule and the roll body; or one of the sides slides the touch; one side Accepting tensile and compressive forces. Thus; the ferrules for the bearings; the information, functions, and primary requirements for the roll and hold frames are as follows:
The functions required for the ferrule and roll data:
Rolling fatigue strength, high hardness, high wear resistance, high durability, and the required functions of the rack:
Good dimensional stability, high mechanical strength; also requires good processability. It is not the same as the use; there is also demand for impact resistance, heat resistance and corrosion resistance.
Information on ferrules and rollovers:
Ferrules and rollovers are usually made of high carbon chromium bearing steel. Most of the bearings; use JUJ.
The chemical composition of SUJ2; in the world; as a bearing material has been standardized. For example: with AISL52100 (United States), DIN100Cr6 (West Germany), BS535A99 (UK) are the same kind of steel.
Further demand for impact resistance; use of chrome steel, chrome molybdenum steel, nickel chrome molybdenum steel as the bearing data, quenching by carburizing; make the steel from the appearance to the appropriate depth has a hardened layer. With appropriate hardening depth, fine Arrangement, suitable for the appearance of hardness and the hardness of the carburizing bearing; the bearing has better impact resistance than the bearing bearing steel; the chemical composition of the steel for ordinary carburizing bearings.
NSK implemented vacuum degassing treatment; therefore; the data used were high in cleanliness, low in oxygen content, and good in quality. The appropriate heat treatment was selected; the life of the rolling tumbling of the bearing was significantly improved.
In addition to the above steel grades; based on special use; also use high-speed steel with excellent heat resistance; stainless steel with good corrosion resistance.
Persistence information:
Stamping the data of the frame; using low-carbon steel. It is not the same as the use; it also uses brass plate, stainless steel plate. Cut the data of the frame; use high-strength brass, carbon steel; also use synthetic resin.

Recommend to friends comments close window

Bearing related knowledge

High-carbon chromium bearing steel becomes the trend of tapered steel roller bearing and pump shaft bearing for bearing steel. A brief analysis of Japan's THK bearing product discrimination "SKF rolling mill bearing operation rules" matters focus on the appearance of rolling bearings

This article links to http://
Please indicate the bearing network http://

Previous: KOYO bearing failure view method analysis of the next section: Tuen Mun: how to open the device oscillation motor bearing

2-tier fruit basket

Organization Rack is made of high quality 304 stainless steel, It is easier to clean without rust, safe, healthy and durable, Prevent rust or chemicals from contaminating food and damaging health. Suitable for putting fruits vegetables and bread in kitchen, dining and bar.

Humanization Design: The stainless steel Fruit Basket are designed with no borders and hidden solder joints, will not cut your hand, and does not hang fabric, more convenient cleaning. Start with the details and let the family eat more reassuring food.

304 Stainless steel basket,2-tier fruit basket,2 layer fruit basket,Stainless steel mesh basket,picnic basket

Shenzhen Lanejoy Technology Co.,LTD , https://www.brassinsert.net