What are the common faults of pneumatic clearing machines? How to exclude and repair? Common faults: 1. The pneumatic stripping machine has a one-week running-in period. Please add gear oil to the chain on time. 2. The tool can't rotate 3. The tool turns weak. 4. The pneumatic scrapping machine can't work QF-253 is Taiwan's Hao Ruisi tools are the latest in the most advanced waste disposal machine, supply hruis waste disposal machine, pneumatic waste machine, printing waste paper edge machine pneumatic waste machine common faults? How to exclude and repair?
Common malfunctions:
1. The pneumatic stripping machine has a one-week running-in period. Please add gear oil to the chain on time.
2. The tool cannot be rotated
(1) The air pressure is too small and the slide switch is open.
(2) The chain can't rotate, it is too tight or stuck with the gear. Unpack the cover, adjust the slider, and whether the chain and the gear are misaligned.
(3) Blade wear of air motor, please replace the blade.
(4) When the pneumatic stripping machine is working, shredded paper gears. First remove the air source, drop a few drops of gear oil and gently hold the chain to rotate until the shredded paper comes out, and the chain can rotate by itself.
3. The tool turns weak.
(1) The air source pressure is not enough, check the air pressure to increase the air pressure.
(2) Whether the slide switch is damaged or not, it needs to be replaced.
(3) Motor blade wear. Replace the wind blade, four pieces.
(4) The chain is too tight, adjust the proper position of the chain, please keep the chain and gear unimpeded.
(5) Whether the bearings of the tool are damaged or not, the tool bearings are made of high quality imported bearings.
(6) Add a few drops of pneumatic tool oil to the tool from the air inlet for one minute to keep the blade smooth.
(7) Since the tool generates a lot of dust after use, please blow it with a blow gun after work to ensure the neatness of the chain.
4. Pneumatic stripping machine can not work
(1) Unable to pick up the paper, adjust the direction of the paper to make it to the best paper position.
(2) The chain is worn, the paper cannot be caught, and the chain needs to be replaced.
(3) The chain is too loose. Adjust the slider screw to the proper position and lock the screw. Pay attention to the proper length.
More Hao Ruisi pneumatic waste cleaning machine series, welcome to inquire!
website:
Http://news.chinawj.com.cn
Submission:
Jinwu Glass Fiber Co., Ltd , https://www.jwglassfiber.com