So far, studies on the residence time of individual particles in a vibrating feeder are still very rare. In the vibrating feeder layer, the particles closer to the bottom are more affected by the vibration force of the tank, and the trajectory of the movement is more severe; the trajectory of the particles closer to the upper part becomes more gradual. The movement of the particles in the vertical direction of the layer is exacerbated, and at this point the movement of the particles at the bottom of the layer in the horizontal direction is no longer a simple plug flow but with a certain degree of back mixing. As the amplitude and frequency increase, the vibration of the particles increases. At the same time, the residence time of the solid particles in the vibrating feeder will also be shorter.
The surrounding environment of the inertial vibrating feeder can be mounted by brackets, and the installation of the brackets can completely eliminate the adverse effects of each link. The electric vibration is fixed to the support frame by the spring seat and the spring in the original hanging position, and the support frame is welded to the ground embedded steel plate. In order to facilitate the replacement of the spring when the cylinder is damaged, the spring seat is locked and fixed, and the spring can be easily replaced.
By modifying the installation mode of the vibrating feeder, the vibrating feeder has no fault, the fault repair rate is zero, and a series of safety hazards such as open flame operation in the gas area and falling of the electric vibration from the warehouse mouth are eliminated. The inclination of the vibrating feeder can also be easily adjusted to improve the reliability of the working of the raw coal system.
Stainless Steel Paper Towel Holder
Stainless Steel Paper Towel Holder,Stainless Paper Towel Holder,Stainless Steel Kitchen Roll Holder,Stainless Steel Kitchen Towel Holder
Heshan Zhongxin Sanitary Ware Ind., Co., Ltd , https://www.baolongfaucets.com