Mona Lisa Tiles
Tiles should pay attention to the following matters:
1, before the tile shop to spend sampling should be to see if the grade, color and sample look the same, if confirmed, it is best to let the person in charge of construction sign, or immediately notify the tile vendors.
2. If the wall is a putty wall or a calendered concrete wall, it must be removed and roughened. Wall tiles must not have less than 1/3 bricks.
3, the ground should be fully wet, play a horizontal line on the wall and on the ground to advance the line, to ensure that the low bricks in each room on the same level.
4, floor tiles is best to use "dry shop" method.
5, bathroom tiles should be set aside about 1% of the slope, and lower than the outer floor tiles about 10mm. The slope of kitchen tiles should be appropriately reduced.
6. The angle of 45 degrees should be used when facing the angle of Yang Yang. The lower edge of the waist line should be the upper edge of the window.
7. After the wall tiles have been plastered for 3-5 days, finish the construction again.
Tile Flooring Knowledge Building Tiles Room Cement Window Kitchen Wall Tiles Bathroom Wall Tiles Bathroom Tiles Bathroom Tiles Kitchen Tiles Ld Tiles
Honde solar ground mounted system adopts full hot-galvanized steel structure and Ground Screw for panel installation. It is quite cost effective, and this screw-in foundation system is not only suitable for natural ground, but also for dense and even tarred surfaces.
Mounting type: carbon steel solar ground screw mounting system
Ground clearance: customized
Tilt angle: customized
Max wind speed: up to 60m/s
Snow load: 1.4KN/m2
Panel direction: portrait or landscape
Standard: International Standard & AS/NZS1170 & CE
Warranty: 5 years on material
Screw Pole Mounting System,Pole Ground Mounting System,Solar Panel Stand System
Hebei Honde Plastic & Metal Co., Ltd. , https://www.foundation-system.com