When the glass coating is sprayed, the glass base needs to be carefully treated to achieve the best results. Then, what kind of treatment does the glass need to be applied? The Repham Smart Coatings will familiarize you with the preliminary preparations before the construction of the glass coating.
Tool preparation
Spray bottle, detergent, alcohol, rag, glass scraper, protective tape, plastic protective film, foil paper, etc.
Border protection
Wipe the joint around the window frame with alcohol, attach a protective tape, and cover the plastic film so that the water or liquid does not get on the window frame.
Base surface treatment
The cleaning of the base surface is very important. The success of the coating is 80% depending on whether the glass base is smooth or not.
1. Wet the rag, apply a proper amount of detergent, and clean it on the surface of the glass. The foreign matter that should not be wiped off should be scraped with a scraper. Be careful not to scratch the glass;
2. Wipe the surface of the glass with a dry rag and dry it as much as possible;
3. Fill the water with a sprayer, firstly pour water clockwise, watch the direction of the water flow, so that it can be better coated during construction, and finally wipe it with a dry rag;
4. Finally, use a rag to dilute the surface of the glass with a proper amount of alcohol, and then wipe it dry;
5. Rack the collector at 5mm at the bottom of the glass so that the drenched liquid can be recovered during construction without wasting or contaminating the window sill, wall and floor.
The pre-preparation of the glass insulation coating before construction also determines whether it can be successful once. Therefore, when the glass insulation coating is applied, the surface of the glass is clean, and the preliminary construction preparation must be carefully handled, otherwise the coating will not be caused. Ideally, even failures require repainting, wasting liquids for glass insulation coatings.
[Follow the WeChat public number "Jiuzheng Paint Network"; pay attention to surprises, scan code to view "If your husband is selling paint..." Jiuzheng Coating Network Exchange Group]
Material characteristic: Using high quality aluminum extruded shutter profiles, multi-layer painting or film layer surface have excellent scratch resistance function, not decay, wearable and anti-collision.Nice white profiles, accepting mass customization according to users requirements(light gray, brown, cream, wood, fused, sand color and light sand color ,etc.)
Integrated protection and decorative features together,the best replacement of traditional theft network security replacement; flexible way open ways, supporting hand control, group control. The door could be your safe rescue channel when in emergency.
When in state of close, support ventilation and lighting, this contribute to enhance the cooling and heating effect of air conditioner, ensure safety, comfortable, energy saving, noise isolation and aesthetics.
Aluminum Roller Shutter Door,Commercial Aluminum Roller Shutter Door,Aluminum Alloy Roller Shutter Door,Color Steel Aluminum Roller Shutter Door
Shenzhen Hongfa Automatic Door Co., Ltd. , https://www.hfautodoors.com