How long will the “Dream Construction Materials” ravage?

It is reported that: It has been verified that a large number of polyurethane foam insulation materials wrapped in the facade of the building during the “11.15” major fire in Shanghai is an important culprit in causing heavy casualties. This kind of material burns very fast, and once it burns, it produces highly toxic gas, which can seriously damage the lives of people in building fires.

This is not the first time that "destruction of building materials" has raged. In some of the most serious fire accidents that have occurred in recent years, there are phantoms of flammable and highly toxic decoration materials. What is incredible is that many flammable and highly toxic building materials actually enter the building materials market under the banner of permission from relevant departments. The polyurethane foam insulation materials, which have been widely criticized and repeatedly hit, are actually promoted by the relevant departments.

Many experts told reporters that the current domestic building materials market, especially the thermal insulation material confusion has been shocking, if not determined to rectify norms across the country, expect a city, a province to "keep the wall clear" to achieve self-protection, it is impossible. It is understood that the insulation materials used in the domestic market can be divided into two major organic and inorganic categories, inorganic materials are basically incombustible, and organic materials including polyurethane foam are flammable products, and can only be achieved after the addition of flame retardants. Flame retardant "level. In fact, many domestic construction companies often use insulation materials without flame retardants for profit maximization, and the relevant departments have not yet imposed mandatory inspections.

The cost of blood is paid year after year. Why did the relevant departments delay the ban on these "destructive materials" and allow them to enter the market? “The people of Qin don’t mourn and mourn, but later generations mourn and miserable, and also make their descendants mourn for later generations.” Looking at the real people-centered approach of the relevant departments, they will rectify the chaotic building materials market and resolutely Life building materials" cleared out.

Steel Bend

Steel bends and steel elbows are both very common pipe fittings which are used to change the flowing direction in a piping systems. In addition to pipe fittings for connecting , elbow pipe also refers to a processing method. It is to Bend the straight pipe through the processing method to achieve the purpose of changing the circulation direction of the pipeline. The manufacturing process and the finished product are called pipe bend.

In order to ensure that the wall thickness of the bending part is no less than that of the straight pipe part, the minimum radius of the pipe bending should be 3D( the D means nominal diameter of this bend). The specific size depends on the operating conditions. That is to say, radius is not restricted as long as it exceeds 3D, which can be 3D or 3.2D, even 4D, 5D, 6D and 8D are also acceptable. In addition, the angle of the bend can be in any degree, some times there are also custom-designed bends which are 22.5 °, 45 °, 90 °, 135 °, 180 °, 270 ° and so on.

ASTM A105,A234 WPB,Pipe Fitting Bend

Cangzhou Youlong Pipe Fitting Manufacturing Co., LTD , https://www.ypco88.com