Paint is a common decoration material in home decoration. It is convenient and quick to construct. It can not only add color to the interior space, but also protect the wall surface. The construction method of the paint is also various, there are mainly three kinds, hand paint method, spray paint method and roller paint. Here's a detailed look at the next three brush painting methods and techniques.
Brush painting methods and techniques 1, hand brushing method
Suitable for ceilings, walls, railings, and rails. Dip the bristles half the height of the paint before painting. If you are concerned about too much bristles, you can tap on the edge of the paint cans. There will be no dripping or drooping during construction. . When painting, hold the handle of the brush between the thumb and forefinger, and apply a force to the fingertips to slightly bend the brush to obtain a better brushing effect. Since the unpainted part is brushed to the brushed part, the part that has been brushed off the paint is prevented from being repeatedly brushed and the brushed surface can be flattened. The advantage is that the brushing force is easy to control, the consumption of consumables is less, and it is not easy to contaminate adjacent equipment. The disadvantage is obvious brush marks.
Brush painting methods and techniques 2, wheel painting method
Applicable to the painting of walls and ceilings, roller than the brush save time, but depending on the roller surface or roughness, will have different lines, brush marks are also less smooth. Choose the right roller size and avoid the use of oily paints. Before the paint is applied, roll the roller into the paint tray and rotate it slightly to make it stained with paint. Roll on the slope and allow the paint to evenly distribute. When the paint is applied, it is painted in the form of a broken line, and the M, W, or inverted N type is rolled up and down to fill the space evenly. The advantage is hand-feeling, quite suitable for DIY, the disadvantage is obvious brush marks, thicker film is also more consumables.
Brush painting methods and techniques 3, spray painting method
Applicable to a large area of ​​space, indoor furniture or places with less debris, or the objects inside the house covered properly, so as not to be stained by floating paint. During construction, the gun and the wall are kept perpendicular and parallel to each other, and the same swing speed is maintained as much as possible to avoid the problem of partial unevenness in the paint. The advantage is that the surface of the paint film is smooth and has good texture, and it saves time and labor. The disadvantages are that it is not easy to paint at dead corners, and collisions are more likely to produce scratches.
The above is an introduction to the methods and techniques of brush painting . I hope to help you. If you still want to learn more about paint painting, please pay attention to this site decoration information channel.
paint
The Morse taper shank Drill Bit is a self-locking (or self holding) taper of approximately 5/8" per foot that allows the torque to be transferred to the drill bit by the friction between the taper shank and the socket. The tang at the end of the taper is only for ejecting the drill bit from the spindle, with the aid of a drift.
The arbor of a drill chuck is often a Morse taper and this allows the chuck assembly to be removed and directly replaced with the shank of a Morse taper drill bit.
Its material is high speed steel,treatment process is roll-forged
Taper Shank Drill Bit,Shank Drill Bit,Taper Shank Drills,Twist Drill
Behappy Crafts (suzhou)Co.,Ltd , https://www.jshaoyue.com