As a modern wall decoration material, diatom mud has previously been environmentally friendly, capable of adsorbing formaldehyde, and purifying indoor air. It is not only so diatom mud's decorative performance is also excellent. Different construction techniques can exhibit different decorative effects. How does diatom mud work better? The following small series introduces three diatom mud construction methods for everyone.
Diatom mud to how to build a method, flat light method
The diatom mud using the flat light method has the same effect as the wall paint. It is mainly used to satisfy the customers who like the effect of a white smooth wall surface. It uses diatom mud as a healthy decoration material to achieve the decorative effect of latex paint. However, this approach is indeed a big challenge for construction workers. It requires a higher construction process.
The main reason is that diatom mud wall material is different from wall paint. Diatom mud itself is not self-leveling. To achieve the customer's standard of plain light, the flat light effect of the coating is closely related to the level of construction. Therefore, before the construction, it must be clear with the owners to establish a common standard of light.
Before the construction, we must first check the putty layer to see whether all aspects meet the requirements, and the construction personnel should configure it properly. Then the construction can only be done when brushing the first time is thin, the area is not about 80cm wide, then coated evenly and evenly in the same direction the second time, to ensure that no marks, bubbles, etc., coating 1-1.2mm thick, wait until After the wall is close to water, check that there is no defect and you can start applying it a third time.
How to use diatom mud for construction method II. Spraying method
The diatom mud spray is to put the prepared diatom mud into the spray gun and use the spray gun to construct it. This practice is very suitable for a large area of ​​space, and the construction efficiency is high. In the construction, it is also necessary to check the integrity of the components, and also to prepare the diatom mud material, and then spray on the test panel to adjust the spray gun.
Spraying should be done with a good spray point and order, following the principle of first up, down, first, near, first, and later. In the spray to do the eye to hand, that is, to match the hands and feet, and the eyes to see at the same time. The general spraying is divided into 2 times, covering the ground for the first time to prevent the exposed bottom, spraying the second time after the first pass, and forming the concave-convex texture after spraying.
How to use diatom mud for construction?
Compared to plain light and spray painting, the art work method is more complex and unstable and random. That is, if the same tool is used to make the same texture, the effect will be different due to different construction personnel. Only a few different factors will affect the artistic effect.
Although this kind of art work method that varies from person to person can be realized in a variety of ways, there is a high demand for the skill of construction workers. Different tools can show different effects. Commonly used tools include rollers, brushes, trowels, and screens. There are natural patterns in texture, as well as abstract expressions.
Editor's Note: The above is a brief introduction to the three methods of how diatom mud should be constructed . I hope the sharing of Xiaobian can help everyone and give you some references. If you want to learn more about building materials, you can pay attention to our website information.
How to build diatom mud
Solar Footlight,Waterproof Led Flood Light,Effciency Solar Flood Light,High Effciency Solar Flood Light
JIANGMEN MOSCOT OPTOELECTRONIC TECHNOLOGY CO.,LTD. , https://www.jmsensorsled.com