Wire processing is mainly the processing of stirrups and plates. Therefore, the length of the side of the tendon is generally 200-2 (XX) mm, so its processing cannot be completed by a bending machine. Therefore, the processing of the stirrup should adopt the bending machine, the five-head and the vertical bending line 3 A combination of equipment. For stirrups with a side length of no more than 800mm, all bending stirrups are used for processing, and large-side long capture bars are processed with five heads. Reinforcing bars with complex shapes are processed with vertical bending centers. Less number of halo or single root (Using) 11 manual way.
It must flow from the raw material to the finished product in one direction. It is best to use an automatic transmission system for the transmission of steel bars between different processes. Try to reduce the inspection of cranes and other lifting equipment. The transmission efficiency of steel bars is greatly improved and the amount of labor is reduced. The transportation of rebar in the raw material area and processing area is as convenient as possible. Lower additional costs.
1) Reinforcing steel bar procurement should use coiled screw and coiled round steel bar as much as possible, which can maximize the yield rate and production efficiency. As far as possible, all steel bars below 016mm (inclusive) are made of spiral snails. At present, there are enough resources in our country to satisfy our use of 012mm, 014mm, 016mm steel spiral snails. The production rate is at least 6% higher than that of straight bars.
2) The management of the processing and distribution center should adopt the modern management software system and the supporting processing equipment and strict management system to achieve strict management and control of all links. The control system should have the functions of both manual operation and automatic processing, and the automation should have the functions of automatic counting, automatic sorting, automatic sizing, and automatic statistics. It has the ability to automatically receive bills of materials, scan and record people. It can automatically switch the processing of a steel bar to hundreds or even thousands of the most processed bills.
The management system of each processing and distribution center should have its own characteristics rather than being the same. It is impossible to buy a set of software to solve all problems. Each processing and distribution center is located in a different area, with different markets and equipment. The composition is different, the quality of the personnel is different, and the management mode is different. Therefore, its management must have its own characteristics, and it is necessary to formulate a management system suitable for itself in order to achieve its management goals. Reprint http: //
================================================== ================================================== ======
Floor Paint Trowel,Floor Paint Epoxy Trowel,Trowels For Floor Paints,Floor Paint Manganess Steel Trowel
Jiangmen Nichiyo Decorative Material Co.,Ltd. , https://www.nichiyopt.com