The tiles are flat and vertical on the wall, so readers know you? How do the tiles stick to the wall? Of course, the tiles are covered with sand and ash, but recently Sticky tiles, then what glue tiles are used? Then, Xiaobian will take a look at the relevant content of the sticky tiles .
First, the tile is required to paste the tile. Tile adhesive, also known as ceramic tile adhesive, is mainly used to paste decorative materials such as tiles, tiles, floor tiles, etc. It is widely used in decorative interiors for interior and exterior walls, floors, bathrooms, kitchens, etc. Its main features are high bonding strength, water resistance, freeze-thaw resistance, good aging resistance and convenient construction. It is an ideal bonding material.
Second, the construction process
(1) Surface treatment
1. All surfaces should be firm, dry, clean, non-sloshing, free of oil, wax and other loose objects;
2. The painted surface should be roughened to expose at least 75% of the original surface;
3. After the new concrete surface is completed, it is necessary to maintain the brickwork for six weeks before laying the brick. The surface of the new plaster should be cured for at least seven days before laying bricks;
4. The old concrete and plastered surfaces can be cleaned with detergent and then rinsed with water. The surface is dried to lay bricks;
5. The substrate is loose, water-absorbing or the surface dust and dirt are difficult to clean. You can apply Rabbin oil to help the ceramic tile bond.
(2) Construction process
1. Apply the glue to the working surface with a toothed scraper to make it evenly distributed, and form a strip of teeth (adjust the angle between the scraper and the working surface to control the thickness of the glue);
2. Each coating is about 1 square meter (depending on the weather temperature, the required construction temperature range is 5 ~ 40 °C), then the tile is pressed on the inside within 5 to 15 minutes (adjustment needs to be 20~) Within 25 minutes);
3. Select the size of the toothed scraper to take into account the flatness of the working surface and the degree of convexity and concavity on the back of the tile;
4. If the groove on the back of the tile is deep or the stone or tile is larger and heavier, it should be double-coated, that is, glue is applied on both the working surface and the back of the tile;
5. Pay attention to retain the expansion joint; after the paving is completed, the next step of caulking can be carried out after the glue is completely dried (about 24 hours);
6. Clean the tile surface (and tools) with a damp cloth or sponge before drying.
7. If cured for more than 24 hours, the stain on the tile surface can be cleaned with tile stone cleaner (do not use acidic cleaner).
How about, I read the relevant introduction of what kind of adhesive tile is used, and I have learned a lot about the adhesive tile. I hope that you can learn more about home improvement knowledge through this article, and you will be able to create a more perfect home environment. Thank you for reading this article and your support and love for Xiaobian. If you want to get more information about home improvement, please continue to pay attention to the decoration home network.
Movie Water Fountain,Digital Water Curtain Fountain,Waterfall Fountain Wedding,Graphic Water Curtain
Guangzhou Dewy water fountain Technology Co., LTD , https://www.dewyfountain.com