In modern times, in order to let children have more special skills, young parents have taken great pains to give their children the training class for this training class in the spare time. The arts, music, dance and other training courses have also become extremely popular. Here we will To introduce: Dance Studio dedicated floor installation process and maintenance methods.
Dance floor special floor installation process:
Ground detection:
1. Use a water content tester to measure the moisture content of the base layer. The moisture content of the base layer should be less than 3%.
2. The strength of the grass-roots level should not be lower than the requirement for concrete strength C-20, otherwise suitable self-leveling should be used to reinforce the strength.
3. The test result with a hardness tester should be that the surface hardness of the base layer is not less than 1.2 MPa.
4. For the construction of dance floor materials, the unevenness of the grass-roots level shall be less than 2 mm in height within a 2-meter ruler, and there shall be no wheel marks, cracks, or broken edges on the surface. Otherwise, according to the ground conditions, do the appropriate ground treatment.
Fixed installation:
1. Partial bonding: bonded to the ground with a special connecting strip supplied by the manufacturer on the ground with the glue edge line as the reference
2. Adhesive bonding: The glued joints on the ground under the ground glue are all bonded to the ground with the special connecting belts provided by the manufacturer.
Specific pavement method:
1. The paving surface must be flat and clean.
2. Place the glue in order and align and merge. Pay attention to the overall effect of the site during the paving process.
3. Open the adjoining two pieces of adhesive along the joints, and place the special connecting tape for the manufacturer on the underside of the joint. First glue one of them to the half of the connecting tape, and then glue the other piece to the adhesive. On the remaining connection tape, close the gap.
Use cautions:
1. Never wear leather shoes, high heels, or easy-to-color sports shoes.
2. Cutting and squeezing are strictly prohibited. The surface should not be rubbed with hard objects to avoid damage or breakage.
3. It is forbidden to use chemical agents such as acid and alkali on the floor and keep away from fire and high temperature to avoid deformation of the floor.
Dance floor special floor maintenance methods:
Step 1: Clean all the stains on the floor thoroughly. If there is gum or chewing gum, use a professional glue remover (black offset remover, glue remover, etc.) directly on the towel to wipe.
The second step: dilute the universal detergent diluted 1:20 and spill it on the floor. Use a waxing machine to remove dirt from the floor, then use a dry mop to dry the dirty water, and then place it in clean water. Wipe clean. (If there is no waxing machine, it can be replaced with other tools. Carefully rub off the dirt).
The third step: After thorough cleaning, 1-2 layers of high-strength wax are required.
Step 4: After waxing, it will take about 20 minutes to allow the floor surface to air dry. After it has dried, it can be stepped on it. The fan-assisted drying can be used to shorten the time. After the general experience, it takes about several hours to completely dry the wax. . If heavy objects are to be moved, the wax must be completely dry before it can be moved. This will ensure that the floor is bright.
The above four steps are general cleaning methods. If the floor is used for a period of time, if the surface of the floor becomes yellow after waxing and the wax is to be re-waxed, then the wax removal agent must be used. The method is as follows: (1) Remove wax water 1: After 10 dilution, evenly apply it to the ground and wait 10-30 minutes. Use a wiping machine to add a low-speed, clean, wax. In the absence of a wax machine, the floor is brushed off with water and the wax must be completely removed, otherwise the wax will not be bright again. After the wax is cleaned, please follow the steps 1 to 4 for cleaning and maintenance.
Editor's summary: The dance floor dedicated floor installation process and maintenance methods are introduced, I hope to help you, more information, please pay attention to this site.
Flooring Flooring Flooring Maintenance Flooring Installation
Drilling Tools,Cordless Drill,Electric Drill,Cordless Tools Set
ZHENGYANG TECHNOLOGY CO.,LTD , https://www.supraone.com