Due to the high frequency of use of the color tile dies in the production process, damage may be inevitably caused, but some minor damages can be repaired and reused, thus reducing waste and production costs. Correcting the minor flaws in the color tile dies is now a must-have method for reducing the number of waste products in each tile tile production plant. Different damages can be corrected in different ways. The following introduces several commonly used methods for the repair of colorful tiles, for your reference:
1. For the tile dies with burr defects, correct it by using a wheel cleaning or a pneumatic chipping method.
2. The damage of the upper die of the tile tile die is not serious, or the tile tile die with small pit can be forged once again in the new die, or it can be corrected by the method of repair welding.
3, for the under pressure (under die forging) of the tile mold can be pre-machined in the machining workshop to correct. This type of under-swaged forging is best not to be re-swaged, as this may become an irreparable waste product because the newly generated scale presses into the forging. For unimportant tile tile molds, it can be reheated once to modify the excess metal into scale.
4, for the wrong way to move the tile mold correction method is to take another re-forging time. If the misalignment is serious, it cannot be corrected. If the misalignment is not serious, it can be corrected by polishing.
5, for the deformation of the tile mold, can be used to correct the temperature of the heating to the forging, or in the cold state with a press for correction.
6, for the overheated tile tile mold normalization method can be used to correct. When the forging hardness is too high or the toughness is insufficient, it can be corrected by repeated heat treatment.
7, for over-burning, sandwich, quenching cracks and serious shape defects and other defects. It is the last scrap, no longer correct.
1. For the tile dies with burr defects, correct it by using a wheel cleaning or a pneumatic chipping method.
2. The damage of the upper die of the tile tile die is not serious, or the tile tile die with small pit can be forged once again in the new die, or it can be corrected by the method of repair welding.
3, for the under pressure (under die forging) of the tile mold can be pre-machined in the machining workshop to correct. This type of under-swaged forging is best not to be re-swaged, as this may become an irreparable waste product because the newly generated scale presses into the forging. For unimportant tile tile molds, it can be reheated once to modify the excess metal into scale.
4, for the wrong way to move the tile mold correction method is to take another re-forging time. If the misalignment is serious, it cannot be corrected. If the misalignment is not serious, it can be corrected by polishing.
5, for the deformation of the tile mold, can be used to correct the temperature of the heating to the forging, or in the cold state with a press for correction.
6, for the overheated tile tile mold normalization method can be used to correct. When the forging hardness is too high or the toughness is insufficient, it can be corrected by repeated heat treatment.
7, for over-burning, sandwich, quenching cracks and serious shape defects and other defects. It is the last scrap, no longer correct.
Professional polishing tools commonly used for other products and other purposes
CHANGZHOU ANTALYA TOOL AND MACHINERY CO., LTD. , https://www.atly-tool.com