The construction of glass insulation coatings has always been a big problem. Because the base surface is too smooth and mostly erected, the general method is difficult to achieve the expected effect, and faced with many failures, the construction has become a test for the workers, the construction master Must have multiple construction experience and arm balance, superior endurance and so on.
There are three kinds of construction methods for glass heat-insulating coatings: spraying, leaching and smearing. With different construction conditions, construction environment and proficiency of construction personnel, different problems will arise. How to solve these problems? Foshan Repe After many construction tests and summaries, the researchers of Smart Coatings have made detailed analysis and reasonable treatment methods for how to solve the problems caused by the construction of glass insulation coatings, and hope to help consumers in the construction of glass base.
1. Spraying: It is also called water spray spraying method. It is constructed by using a small watering can. This method is applied to the construction of small and medium-sized glass.
Advantages: fast speed and uniform coating;
Disadvantages: there is a watermark that affects the transparency of the glass;
Solution: increase the pressure of the watering can, so that the sprayed liquid is atomized as much as possible. The smaller the volume of the sprayed water mist, the smaller the watermark point, which can minimize the generation of the watermark;
2, shower: watering can and small coating machine can be used for construction, mainly for large glass curtain wall, large area of ​​glass surface.
Advantages: fast speed, uniform coating and high transparency;
Disadvantages: the construction is difficult, and it is prone to the phenomenon of fluency;
Solution: Change the water flow of the spout, the construction personnel must have experience in multiple constructions, and have strong endurance to ensure the balance of the arm, with a view to success;
3, smear: use a sponge, rag directly to the surface of the glass, suitable for small glass surface of a single block.
Advantages: Simple construction, no need for any technology consumers can build their own;
Disadvantages: there are scratches that affect the transparency effect;
Solution: Do not use too much fluid in the sponge. Do not apply too much force when applying. Try to reduce the scratch on the surface of the coating by applying it horizontally and vertically.
[Follow the WeChat public number "Jiuzheng Paint Network"; pay attention to surprises, scan code to view "If your husband is selling paint..." Jiuzheng Coating Network Exchange Group]
Motorcycle Parts ,Motorcycle Accessories,Motorcycle Spare Parts,Motorbike Parts
NINGBO DEMY (D&M) BEARINGS CO.,LTD , https://www.demybmtbearing.com