Several ways to replace the "metal destroyer bearing"

Source: China Bearing Network Time: 2013-01-25

/*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089';

1) The hammer device in the maintenance device is faulty. When the hammer is changed, the rotor component is used in the U-turn; in order to avoid the balance of the rotor component; all the hammers in the metal destruction machine need to be turned around in the same direction; otherwise, there will be intense oscillation during operation.
2) The difference between the two groups of hammer components exceeds 5 grams. The method of sweeping is to adjust the hammer component; the difference between the two components is less than 5 grams.
3) The single hammer is stuck too tightly; there is no opening during operation. After the stop, the investigation can be changed by hand; the method is to make the hammer change sensitive.
4) The other parts of the rotor are unbalanced; at this time, the demand should be carefully checked to adjust the balance.
5) The spindle is bent and deformed. The method of processing is straightening or replacing.
6) Bearing clearance exceeds the limit or damage. Usually replace the new bearing to deal with the problem.
7) The bottom corner fixing nut is not fixed tight or loose during operation. The method of handling is fastening.

Recommend to friends comments close window

Bearing related knowledge

"Bearing common sense" full analysis of the bearing selection of smooth grease, the analysis of the high-speed angular touch ball bearing used in the spindle of the machine tool
NSK linear bearing application methods and matters needing attention to the common shortcomings of heat treatment of bearing parts

This article links to http://
Please indicate the bearing network http://

Previous:The variety of bearing noise Next: Anatomy: The cause of bearing faults and failures

Stainless Steel Goblet Holder

wire holder is made of high quality 304 stainless steel, It is easier to clean without rust, safe, healthy and durable, Prevent rust or chemicals from contaminating food and damaging health. Suitable for putting the wine glass holder.

China leading manufacturers and suppliers of Wine glass holder,Goblet Holder, and we are specialize in Wine Rack,Hanging Wine Rack, etc.

Goblet Rack,Stainless Steel Goblet Rack,Wine Glass Holder,Wine Glass Rack

Shenzhen Lanejoy Technology Co.,LTD , https://www.brassinsert.net