Home>Bearing knowledge>Analysis of protection methods for water pump bearings

/*728*90 created on 2018/5/16*/ var cpro_id = "u3440131";

Analysis of protection methods for water pump bearings

---

/*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089';

(1) The pump that is newly put into use; usually it needs to replace the smooth grease (oil) after 100 hours of operation; it will be replaced once every 500 hours in the future.
(2) Select smooth bearing with smooth grease; after 1500 hours of operation; replace the smooth grease; the amount of oil added may not be too much or too little; too much or too little smooth grease will cause the bearing to heat; the amount of fuel is usually grasped 1/2~2/3 of the bearing chamber volume is suitable.
(3) Regarding the selection of smooth oil smooth bearings; the amount of oil should be added to the regular orientation.
(4) Containers containing smooth oil or smooth grease should be clean; usually should be sealed; there should be no dust, iron filings, etc.; avoid damage to the bearings.
(5) Motor bearings usually use sodium-based smooth grease; this smooth grease is characterized by high temperature (125 ° C); but it is easy to dissolve in water; so it can not be used for the smoothness of water pump bearings.

---

Recommend to friends comments close window

Bearing related knowledge

Talking about the Classification of High Temperature Adaptive Ceramic Bearings of FAG Advanced Angle Touch Ball Bearings INA bearing-insertion roller bearing device method How to dismantle the SKF outer spherical bearing how to respond to the motor bearing noise appearance?

This article links to http://
Please indicate China Bearing Network http://

Previous:Imported bearing inner ring fixing method Next: China is "collecting power" to the forefront of international hardware processing and exporting countries

Paint Roller Brush

Paint Roller Brush,Paint Roller Cleaner,Paint Brush Spinner,Paint Brushes And Rollers

JIANGSU RARHON TOOLS CO.,LTD , https://www.rarhontools.com