The wood is tough, the texture is clear, the hardness and strength are moderate. Generally, the openwork relief can be adapted. The planing surface is smooth, the string pattern is beautiful, and the pattern of “chicken wing wood†is one of the main furniture materials. The characteristics of the wood, the heartwood and sapwood are clearly distinguished, the sapwood is narrow and dark yellow, and the heartwood is dark purple-grey; the material is light and hard, the mechanical strength is high, the texture is straight, and the structure is thick. It can be used for furniture, decoration, etc. The eucalyptus is dried, shaped, carved and lacquered, and can be used to make exquisite lacquer crafts. The furniture market in the north is everywhere. Xiaobian is here to introduce you to the knowledge of the maintenance of beech furniture, I hope to help everyone.
First, the surface of the beech furniture should avoid rubbing with hard objects, so as not to damage the texture of the paint surface and the surface of the wood. For example, when placing decorative items such as porcelain bronzes, be careful. It is best to use a soft cloth.
Second, there are two kinds of eucalyptus homes. The traditional eucalyptus furniture generally has no lacquer on the surface, just hot wax. The newly produced hardwood furniture is now protected by a large lacquer or varnish. There are differences in the maintenance methods for differently treated hardwood furniture.
Third, avoid placing the beech furniture in front of the large glass window facing south. The long-term direct sunlight will make the furniture too dry and fade.
Fourth, hot water cups, etc. can not be placed directly on the surface of the beech furniture, leaving traces that are not easy to remove. Color liquids, such as ink, should never be scattered on the table.
5. There is water in the eucalyptus, and the hardwood furniture will shrink when the air humidity is too low. When it is too high, it will swell. Generally, hardwood furniture has a shrinking layer when it is produced, but it should be taken careless when placed. Do not place it in a place that is too humid or too dry, such as near high temperature and high heat such as stove heating, or too humid in the basement to avoid mold. And dry cracking.
6. If the house is in a low-rise house, the floor should be properly padded if the ground is wet, otherwise the leg will be easily corroded by moisture.
Seven, the room is not flat, the length of time will lead to deformation of the beech furniture, the way to avoid is to use a small piece of wood to level.
8. Never use a wet rag or a rough rag to rub the eucalyptus furniture, especially the old furniture. Use a clean and soft cotton cloth, add a little furniture wax after a while, walnut oil is better, gently rub back and forth along the wood grain.
IX. Handling or moving furniture should be handled lightly, and hard to pull hard, so as not to damage the structure. Tables and chairs can not be raised, easy to fall off, should be lifted from the table and the chair, the cabinet is best to remove the door and then lift, can reduce the weight, but also avoid the door activity. If you need to move a particularly heavy piece of furniture, use a soft rope to pull it under the furniture chassis and lift it.
10. The surface of the furniture should avoid placing too heavy items for a long time, especially TVs, fish tanks, etc., which will deform the furniture. Non-breathable materials such as plastic sheets should not be placed on the table.
TS Hardware is a China leading company that has engaged in CNC Machining Prototype & Production Services for more than a decade. We`ve helped thousands of clients speed up their projects with our services.
Equipped with leading-edge CNC machines, we have the capability to offer you a reliable One-Stop CNC machining service from design, prototyping, production to surface finishing. Our CNC turning services and CNC milling services offer rapid prototyping/end-use parts production in a wide range of materials, efficient for both time and cost.
Carbon Steel Cnc Part,Carbon Cnc Part,Carbon Cnc Precise Part,Carbon Prototype Parts
Taizhou TS HARDWARE Co., Ltd , https://www.shuwengroup.com