Henkel loctite510 515 glue Loctite 518 plane seal anaerobic adhesive, Henkel loctite515 anaerobic adhesive, Henkel Loctite 510 sealant. Yantai Loctite 510 sealant. National best-selling hotline: (0.7.5.5.-.2.8.3.6.9.0.7.8) Agent: (1.8.9.2.6.5.9.6.3.0.6.) Li Chao
Loctite® 510 Glue is an anaerobic, high temperature resistant, fluid resistant, rigid adhesive layer. Flange parts for tight fit of rigid structures with a maximum fill clearance of 0.25 mm . This product has a maximum operating temperature range of 204 ° C and it has excellent solvent resistance and chemical properties.
Loctite® 5140 Glue is an anaerobic, military grade for potting, coating, industrial, electronics and military industries with high temperature resistance up to 200 °C
Loctite® 515 is an anaerobic, versatile, flexible adhesive layer with excellent fluid resistance and non-corrosive properties. A flexible gasket can be formed for machining that fills a rigid flange with a gap of less than 0.25 mm . It has flexibility to allow the flange to move small during operation.
Â
Loctite® 518 Glue is anaerobic, versatile, flexible, fluid resistant and non-corrosive. Especially suitable for aluminum surfaces. It forms a flexible, solvent-resistant seal that does not tear or age. Can be used for flexible metal assembly including aluminum surfaces. It is convenient to disassemble and remove.
[Information Description]
1. Anaerobic type, general purpose type, high temperature resistance, rigid rubber layer, good flexibility, excellent fluid resistance, non-corrosive, excellent solvent resistance and chemical properties.
2. Can form a flexible, solvent-resistant seal that will not tear or age.
3. Can form a flexible gasket, filling a rigid flange with a gap of less than 0.25mm. It has flexibility to allow the flange to move small during operation.
4. It is convenient to disassemble and clear.
ã€Instructions】
1. Clean the oil and residual colloid with acetone.
2. Apply glue to one side to form a continuous closed glue line, which will enclose the sealing part, including around the screw hole.
3. Align the whole, tighten the screws to avoid misalignment, and assemble them within 20 minutes after applying glue.
4. Let stand for 30 to 60 minutes, cure for 4 to 6 hours, and withstand high pressure.
[Scope of application]
1. Especially suitable for aluminum surfaces.
2. For flexible metal assembly.
3. For machining.
4. For flange parts with tight fit of rigid structure, the maximum filling clearance is 0.25mm.
[Application points]
1. Apply an uninterrupted circumference when applying glue.
2. Tighten the flange bolts properly so that they are not slightly displaced or displaced.
3. The flange must be degreased.
4. Anaerobic sealant should not be treated with a coating of pre-cut gasket.
[Selection method]
1. It is commonly used as a slow curing type sealant. Appearance observation: It is easy to break due to the addition of quartz silicon molecular material, and the appearance is rough and elastic.
2, fast curing type sealant, appearance observation: due to the addition of a large amount of rubber as a material, the sealant is elastic, the bending can not be broken, the appearance is delicate.
3, non-curing sealant, appearance observation: due to the addition of stone high temperature molecular material, it is particularly easy to break, to be lightly handled, the appearance of rough elastic is small.
[Package Specifications]
50ml, 250ml / bottle, stored in a cool place for one year.
Cangzhou Youlong Pipe Fitting Manufacturing Co., LTD , https://www.ypco88.com