STAROBOT automatic dispenser knowledge
source:
The STAROBOT automatic dispensing machine produced by Dongguan Changan Key Electronics Factory is to place a special glue on the top of the PCB board to fix the chip components, and then pass the wave soldering after curing. Dispensing is done automatically according to the program.
STAROBOT automatic dispensers, also known as glue applicators, glue dispensers, glue dispensers, etc., are automated machines that control fluids and apply fluid to the surface of the product or inside the product. Dispensing machine is mainly used for glue, paint and other liquids in the product process. Accurate point, injection, coating and dripping to the precise position of each product can be used for dot, line, round or arc.
STAROBOT automatic dispenser is suitable for all kinds of solvents, adhesives, paints, chemical materials, solid glue, etc., including silicone, EMI conductive adhesive, UV adhesive, AB adhesive, quick-drying adhesive, epoxy adhesive, sealant, heat. Glue, grease, silver glue, red glue, solder paste, thermal grease, solder paste, transparent paint, screw fixer, wood glue, anaerobic glue, acrylic glue, anti-wear glue, crystal glue, potting glue, speaker glue Instant glue, rubber, paint, enamel paint, lacquer, ink, pigment, etc.
The STAROBOT automatic dispenser can be applied to the following areas:
1. Electroacoustic industry: speakers, speakers, buzzers, stereos, headphones
2. Inductor industry: small transformers, chip transformers, inductors, relays, small coil motors.
3. Communication industry: mobile phone buttons, mobile phone case bonding, walkie-talkies, telephones, fax machines
4. Computer, digital products, digital cameras, MP3, MP4, electronic toys, chassis bonding
5. Switch, connector, wire, plug cable
6. Electronics: electronic components, integrated circuits, circuit board solder paste, electronic components fixed and dustproof and moisture proof, LCD screen, etc.
7. Optical: optical lens, optical head, magnetic head
8. Mechanical hardware
9. Battery box seal
10. Trademark fixed bonding
11. LED industry
The working principle of Starobot automatic dispenser: 1. Compressed air is sent into the plastic bottle (syringe), and the glue is pressed into the feeding tube connected to the piston chamber. When the piston is in the upstroke, the piston chamber is filled with glue, when the piston As the dip needle is pushed down, the glue is forced out of the needle tip. The amount of glue that is dripped is determined by the distance under the piston and can be adjusted manually or in software.
2. Features: high speed, low sensitivity to glue viscosity.
3. Advantages: It can improve the dispensing speed, improve the dispensing environment and improve the dispensing quality.
The above materials are provided by Dongguan Changan Key Electronics Factory, Miss Net Mo 0769-85492889
Residential Sectional Garage Door
A typical version of an overhead garage door used in the past would have been built as a one-piece panel.The panel was mounted on each side with unequal parallelogram style hinge lifting mechanism. Newer versions of overhead garage doors are now generally built from several panels hinged together that roll along a system of tracks guided by rollers. The door is balanced by either a torsion spring system or a pair of extension springs.A remote controlled motorized mechanism for opening garage doors adds convenience, safety, and security
• Aluminum garage doors are low-cost, light, rust-proof, and feature low-maintenance. They are prone to denting because aluminum is not strong and they are energy-inefficient since aluminum is a highly conductivematerial.
• Fiberglass and vinyl garage doors are composite units, combining a steel core behind a fiberglass or vinyl skin. They have also polyurethane insulated base sections, or other type of foam insulation. These premium doors can match steel garage doors, and be a realistic imitation of wood (namely fiberglass units), but they may be more expensive than steel units.
• Steel doors have become common and are available in a variety of sizes and styles, provide strength and security, are cost-competitive, and may have optional insulating value. Extra strength is available with two or three layers of galvanized steel with a low gauge number (23-24 gauge steel panels).
• Wood garage doors offer aesthetic appeal, but they are high-maintenance and may be expensive. Low-priced wood garage doors may warp and break easily.
Residential Sectional Garage Door,Automatic Metal Sectional Garage Door,Standard Lift Garage Door Drum,Polyurethane Foam Garage Door
Shenzhen Hongfa Automatic Door Co., Ltd. , https://www.hfautodoors.com