General steps for renovation of old epoxy floor paint

Epoxy floor paints are suitable for a variety of occasions, including industrial areas such as factories, parking lots, warehouses, etc. It is often the case that people, vehicles or heavy machinery travel on it. Over time, the ground is easily damaged or there are some defects. Damage to the old floor will affect its protective effect on the ground, and it will cause dusting and sanding. Dust entering the machine will cause mechanical damage. Therefore, the old floor will need to be refurbished. The following will introduce the steps for the renovation of epoxy floor.

1, clear the old floor. For the old floor, it is necessary to use a professional epoxy grinding equipment to completely remove it. This first step is unified, and then construction is carried out according to different epoxy floor types.

2, remove grease. If there is oil on the ground, it must be clear, and then degreasing and degreasing should be carried out according to the actual conditions.

3, crack treatment. Poor materials and construction quality can often cause ground cracks. If cracks are found, you can use a cutting machine to cut the cracks into V-shaped grooves, and then pour epoxy mortar to make them flat.

4, pit treatment. Ground pits can make it difficult to level the floor. It is recommended that you use a sander to grind the ground, remove the empty drum on the floor, and then use mortar or cement for pothole treatment.