1. Notes on operation 1.1 The pump can only operate within the specified parameters. 1.2 The pump can not be operated when the discharge valve is closed or closed to a very small opening, otherwise it will cause the pump to heat up and reduce its life. If the pump Is installed in a parallel system, each pump must be run under certain parameters to ensure that the pump flow; 1.3 pump can not close the suction valve operation, otherwise the pump dry rotation, resulting in pump parts damaged; 1.4 Pumping medium can not contain air or gas, otherwise it will make the pump flow and head can not be accurately measured, and will produce grinding damage to the parts; 1.5 This type of pump can not convey belt material, otherwise it will reduce the pump efficiency And the life of the parts; 1.6 pump before the pump should be carried out before the inspection. 2, check before starting the pump 2.1 before starting the pump, check all bolts, pipe and lead connection is tightened; 2.2 check all the instruments, valves and instruments are routine; 2.3 check the oil ring position , Oil level gauge oil is normal; 2.4 check the motor steering is correct. 3, the pump start 3.1 Pump start matters needing attention a, the type pump pump medium temperature is high (b, when the start of observation pressure gauge and switch instructions, in order to adjust; c, pump start, can not make the discharge valve is closed Or close to close for a long time, otherwise it will overheat the pump liquid .3.2 Kai pump step a, first before starting (according to the above steps); b, open the pump suction valve and water seal valve; c, Turn off the discharge pipe, so that the pump is full of liquid; d, start the motor, then open the valve discharge pipe .4, pump operation check pump operation, the city should press 2.2 procedures at regular intervals to check the instrument to This determines the pump] work is normal, but also to check the pump speed, in addition, to monitor the pump flow, head, temperature and lubrication conditions in the event of a pump failure, pump should be stopped and refer to the troubleshooting table for maintenance .5, Stop Pump 5.1 Pump the discharge valve to minimum flow, but never allow the pump to close the suction valve. 5.2 Close the motor. 5.3 Close the pump discharge valve. Pump suction valve.
Deep Red Grow Light
Ultra Plantâ„¢ Grow Light offers One Chip Technology aimed to meet your indoor growing expectation such as improve plants' quality, increase yield, or better the margin, etc., all for helping you realize a higher return on your crops.
Ultra Plantâ„¢ Grow Light is combined our advanced All-In-One technology with patented optical design and customized light full spectrum supported from our experienced LED engineers, plant specialists and other partners working on horticulture.
From Ultra Plantâ„¢ APP, you are able to schedule the growing process including photoperiod, brightness and spectral in advance. The lighting system will help you grow smarter, easier and better.
Ultra Plantâ„¢ is the most versatile horticultural grow lighting fixture for indoor plants with flexible full spectrum, brightness control and uniform, wider light distribution, suitable for top lighting of all types of crops. No matter it applies to anywhere for any crop, Ultra Plantâ„¢ can do perfect work for you.
Deep Red Grow Light,Deep Red Led Grow Light,Deep Red Led Grow Lights,Deep Red Grow Lights
Feton Corporation , https://www.ultraplantleds.com
