Ball Camera Common Faults and Solutions

Ball Camera Common Fault Analysis Q1: No action, no image after power-on Q2: Self-test is abnormal, there are images but accompanied by motor squeak Q3: Self-check operation is normal, but no image Q4: Self-test is successful, but it cannot be controlled Q5 : Image is not stable Q6 : Ball machine is out of control Q7 : Camera aperture cannot be controlled
Q1 : No action, no image after power on

Possible Causes

Countermeasures

The power supply is damaged or the power is insufficient. Replace the power cable. Correct the fault of the engineering circuit.

Q2: The self-test is abnormal, there are images but there is a motor squeal

Possible Causes

Countermeasures

Mechanical troubleshooting camera tilting power supply is not enough

Replace the power supply that meets the requirements, it is best to put the switching power supply near the dome

Q3: Self-check operation is normal but no image

Possible Causes

Countermeasures

Video line error correction Video line contact failure detection Camera damage Replace

Q4: Self-test is successful, but it cannot be controlled

Possible Causes

Countermeasures

The control signal line is connected incorrectly. The ball machine address does not correspond. Re-select protocol does not match.

Adjust the protocol to match the control system and power it back on

Q5 : Image is not stable

Possible Causes

Countermeasures

Video line bad contact detection

Q6: The ball machine is out of control

Possible Causes

Countermeasures

The self-test is abnormal. Re-power on the control line. Poor contact detection. Problems with host operation. Host reloads with excessive load or communication distance is too far.

1. Confirm the termination resistance

2. Increase the code distributor

Q7: The aperture of the dome camera cannot be controlled

Possible Causes

Countermeasures

Aperture is a manual state. Use the control command to set the aperture to the manual state before the aperture can be controlled.

Bath Taps

Our range of bath taps and mixers are available in a gorgeous choice of designs. Choose from a range of contemporary or traditional Basin Taps or bath taps, or if you are looking for something a little more modern, select from our range of deck mounted or wall mounted basin and bath mixers which deliver water through a single spout. For the ultimate flexibility, also take a look at our range of bath shower mixers. Our bath taps and mixers combine exceptional quality design with real value for money. Selected products in the range also include clever flow limiting devices to help save water. Taps with lever handles have also been designed to be easy to use and some of our ranges are suitable for low pressure.

Bathroom Basin Taps, Bath Mixer Taps, Shower Bath Taps, Stainless Steel Bath Taps

ZHEJIANG KINGSIR VALVE CO., LTD. , https://www.kingsirvalve.com