The stainless steel press M-profile fittings are manufactured and tested according to (DIN) DVGW W534-1995,materials are available to stainless steel 304L ,stainless steel 316L and galvanized carbon steel .the press fitting sizes from 15mm up to 108mm with EPDM and FKM O-Ring  which can be used a wide range of application ,like Drinking water ,Heating ,
Cooling Water,Building ,Chemical and so on .
TECHNICAL DATAÂ
Â
| Products name | DVGW press fittings tee stainless steel tee with male screw threaded end |
| Material | stainless steel 304L,316L, |
| Size | Â OD12mm up to OD108mm |
| Thickness | 1.5-2.0MM |
| Standard of  Press fittings |  (DIN)DVGW W534-1995; (JIS)JWWA G116:2001; GB/T 19228.1-2003 |
| O-Ring | Chlorinated butyl rubber(CIIR), EPDM, HNBR, NBR and FKM, etc. |
| working temperature |  -15°C to 110°C, |
|  working pressure | 1.6MPa |
| Anneal | all stainless steel pipe fittings are annealed in inert gases before packing. |
| End connection | Â press fittings |
| Terms of payment | 30% TT deposit, the balance is paid before shipping the goods |
| Certificate | CE,ISO,SGS |
| Delivery time | About 7-30 days |
Â
| OD Â (mm) | L (mm)Â Â Â | Z (mm) | L1 (mm) | Â Â T (mm)Â |
| 15xR1/2 | 68 | 28 | 40.5 | 1.5 |
| 18xR1/2 | 70 | 30 | 42 | 1.5 |
| 22xR1/2 | 79 | 37 | 44 | 1.5 |
| 22xR3/4 | 79 | 37 | 51 | 1.5 |
| 28xR1/2 | 92 | 46 | 47 | 1.5 |
| 28xR3/4 | 92 | 46 | 54 | 1.5 |
| 28xR1 | 92 | 46 | 62 | 1.5 |
| 35xR1/2 | 106 | 54 | 50.5 | 1.5 |
| 35xR1 1/4 | 106 | 54 | 71 | 1.5 |
| 42xR1 1/4 | 124 | 62 | 72 | 1.5 |
| 54xR1 1/2 | 146 | 74 | 85 | 1.5 |
| 54xR2 | 146 | 74 | 92, | 1.5 |
*Basic Principle Of Stainless Steel Press Profile fittings.
1,Principle of leak-proof and sealing :the stainless steel press type fitting is filled with O-ring seals in a radial   contraction,which is leaky and water-stopping, instead of leak-stopping.
2,Principle of resistant extraction :The middle position of the stainless steel press type fitting is small, but the   two ends are large, and the pullout is >3.0mpa.
3,Principle of anti-rotation :the stainless steel press fitting and tube are pressed into a hexagon and cannot be rotated.
Preview Press fittings stainless steelÂ
O-Ring EPDM and FKMÂ Â
 Â
The EPDM O-Ring is tasteless non-toxic,also it has excellent antioxidant, , heat and cold resistance, ageing resistance, It can be used for long time in normal working temperature  is -20° degree to 110° degree .
Most of the FKM O-Ring is used at at high temperature working environment ,for heat , steam ,working temperature  is -20° degree to 205° degree .
Advantages of Stainless Steel Press FittingsÂ
*Material performance superiority .
*Advantages of environmental protection
*The superiority of connection technology
*The superiority of appearance
*Cost-effective superiority
*Quick connection and safe installations
*Remarkable corrosion resistance
*Superior crush resistance
Contact Us
Mr.Peter
Mobile:+86-13777772065
Website:http://chinapressfittings.com
Address:No. 2869, YongQing Avenue, ShaCheng Street, Economic And Technological    Development Zone ,ZheJiang Province,China
Related Products
M Profile Press fittings  and V profile press fit fittings
Coupling ,Equal coupling,Reducing coupling, adaptor with female threaded end,adaptor with male threaded end, coupling with threaded end ;90 degree bend & elbow ,90 degree bend with female threaded end, 90 degree bend with male threaded end,reducing elbow,90 degree bend with plain end, 45 degree elbow with screw end;Â
press Tee ,equal tee with female threaded end,equal tee with male threaded end,jpress reducing tee, flanged adator press fittings.press short elbow ,press pipe fittings ,press pipe tube ,custom made press fittings.
Â
The stainless steel press M-profile fittings are manufactured and tested according to (DIN) DVGW W534-1995,materials are available to stainless steel 304L ,stainless steel 316L and galvanized carbon steel .the press fitting sizes from 15mm up to 108mm with EPDM and FKM O-Ring  which can be used a wide range of application ,like Drinking water ,Heating ,
Cooling Water,Building ,Chemical and so on .
TECHNICAL DATAÂ
Â
| Products name | DVGW press fittings tee stainless steel tee with male screw threaded end |
| Material | stainless steel 304L,316L, |
| Size | Â OD12mm up to OD108mm |
| Thickness | 1.5-2.0MM |
| Standard of  Press fittings |  (DIN)DVGW W534-1995; (JIS)JWWA G116:2001; GB/T 19228.1-2003 |
| O-Ring | Chlorinated butyl rubber(CIIR), EPDM, HNBR, NBR and FKM, etc. |
| working temperature |  -15°C to 110°C, |
|  working pressure | 1.6MPa |
| Anneal | all stainless steel pipe fittings are annealed in inert gases before packing. |
| End connection | Â press fittings |
| Terms of payment | 30% TT deposit, the balance is paid before shipping the goods |
| Certificate | CE,ISO,SGS |
| Delivery time | About 7-30 days |
Â
| OD Â (mm) | L (mm)Â Â Â | Z (mm) | L1 (mm) | Â Â T (mm)Â |
| 15xR1/2 | 68 | 28 | 40.5 | 1.5 |
| 18xR1/2 | 70 | 30 | 42 | 1.5 |
| 22xR1/2 | 79 | 37 | 44 | 1.5 |
| 22xR3/4 | 79 | 37 | 51 | 1.5 |
| 28xR1/2 | 92 | 46 | 47 | 1.5 |
| 28xR3/4 | 92 | 46 | 54 | 1.5 |
| 28xR1 | 92 | 46 | 62 | 1.5 |
| 35xR1/2 | 106 | 54 | 50.5 | 1.5 |
| 35xR1 1/4 | 106 | 54 | 71 | 1.5 |
| 42xR1 1/4 | 124 | 62 | 72 | 1.5 |
| 54xR1 1/2 | 146 | 74 | 85 | 1.5 |
| 54xR2 | 146 | 74 | 92, | 1.5 |
*Basic Principle Of Stainless Steel Press Profile fittings.
1,Principle of leak-proof and sealing :the stainless steel press type fitting is filled with O-ring seals in a radial   contraction,which is leaky and water-stopping, instead of leak-stopping.
2,Principle of resistant extraction :The middle position of the stainless steel press type fitting is small, but the   two ends are large, and the pullout is >3.0mpa.
3,Principle of anti-rotation :the stainless steel press fitting and tube are pressed into a hexagon and cannot be rotated.
Preview Press fittings stainless steelÂ
O-Ring EPDM and FKMÂ Â
 Â
The EPDM O-Ring is tasteless non-toxic,also it has excellent antioxidant, , heat and cold resistance, ageing resistance, It can be used for long time in normal working temperature  is -20° degree to 110° degree .
Most of the FKM O-Ring is used at at high temperature working environment ,for heat , steam ,working temperature  is -20° degree to 205° degree .
Advantages of Stainless Steel Press FittingsÂ
*Material performance superiority .
*Advantages of environmental protection
*The superiority of connection technology
*The superiority of appearance
*Cost-effective superiority
*Quick connection and safe installations
*Remarkable corrosion resistance
*Superior crush resistance
Contact Us
Mr.Peter
Mobile:+86-13777772065
Website:http://chinapressfittings.com
Address:No. 2869, YongQing Avenue, ShaCheng Street, Economic And Technological    Development Zone ,ZheJiang Province,China
Related Products
M Profile Press fittings  and V profile press fit fittings
Coupling ,Equal coupling,Reducing coupling, adaptor with female threaded end,adaptor with male threaded end, coupling with threaded end ;90 degree bend & elbow ,90 degree bend with female threaded end, 90 degree bend with male threaded end,reducing elbow,90 degree bend with plain end, 45 degree elbow with screw end;Â
press Tee ,equal tee with female threaded end,equal tee with male threaded end,jpress reducing tee, flanged adator press fittings.press short elbow ,press pipe fittings ,press pipe tube ,custom made press fittings.
Â
Aluminum Dihydrogen Phosphate Powder
PRODUCT NAME: Aluminum Dihydrogen Phosphate/Monobasic Aluminum Phosphate
PRODUCT TYPE: High Temperature Materials ,Binder
PRODUCT APPREANCE: White Powder
CHEMICAL ClASS: Al(H2PO4)3
CAS No．13530-50-2.
PRODUCT APPLICATION:It( Aluminium Phosphate Gel ) is mainly used as binder and curing agent in the production of Hi-Temp Refractory Materials for kiln, spray paint, Fire clay, casting and foundry industry. It is a type of colorless and odorless but extremely sticky liquid, freely soluble in water and solidifiable at normal room temperature.
TECHNICAL DATA
|
Test Items |
Technical Parameters |
|
Appearance |
White powder |
|
The PH Value |
2-4 |
|
Residue on Sieve % |
0.5 Max |
|
P2O5 % |
Total content 91-97% |
|
Al2O3 % |
STANDARD PACKAGING: 25kg/bag, Plastic-lined woven bag or Composite paper bag.
TRANSPORT AND STORAGE
Protect against weathering. Store in a cool and dry environments and prevented from insolation. avoid extreme fluctuations in temperature. Special conditions for opened packaging: Close bags after use to prevent the absorption of moisture and contamination.
Aluminum Dihydrogen Phosphate Powder
Aluminum Dihydrogen Phosphate Powder, Mono Aluminum Phosphate, Aluminum Dihydrogen Phosphate, Hi-Temp Refractory Materials,Monobasic Aluminum Phosphate,Aluminium Phosphate Gel
shijiazhuang city xinsheng chemical co.,ltd , http://www.xsphos.com