In today's market, the dust removal equipment is highly competitive, and the advantages of Pincheng boiler dust removal equipment are very strong. Our company's technology is developed under the continuous research of the integration of foreign technology and domestic advanced technology. The overall performance is high and it is obtained by users. Unanimously recognized.
Boiler dust removal equipment is that the flue gas enters the venturi through the flue, and the water is sprayed evenly at the entrance of the throat. Due to the high-speed movement of the flue gas, the sprayed water is melted into a fine water mist wet flue gas Ash material, in this way, the ash material collides with the water droplets, especially the dust material with a small diameter can be dissolved by water mist. The boiler dust collector achieves one-time dust removal and desulfurization. These are fully prepared for the separation of ash. After that, it enters the cylinder and the flue gas that rapidly reduces the temperature continues to impact the lime water in the pool. The dust and SO2 in the flue gas and the pool The lime water reacts to produce sulfate, which sinks to the bottom of the water under the action of inertial force, gravity, adhesion, and cohesion to complete the secondary desulfurization process. The water splash caused by the flue gas, the water mist and the washed flue gas are under the gravity of the fan. The gas and water are lifted at the same time to make the flue gas fully react with the lime water, and then the gas and water are separated by the impeller dehydrator. The water flows into the pool through the drain pipe, and the flue gas completes the third dust removal and desulfurization. The purified gas Exhaust into the atmosphere through the fan.
Our products have passed the quality inspection, which can be more convenient in use. The performance of the boiler dust removal equipment has been improved to a certain extent due to deepened improvement. We also introduced a sophisticated modern financial system And electronically controlled automation equipment system to ensure the overall quality of the product!
For more details on boiler dust removal equipment: http: //
================================================== ================================================== ======
Mobile phone landline fax QQ
Although there are many types of tapping screws, they all have the following similarities:
(1) are generally made of carbonized carbon steel (accounting for 99% of total production). It can also be made of stainless steel or non-ferrous metals.
(2) The product must be heat treated. Carbon steel tapping screws must be carbonized and stainless steel tapping screws must be solution hardened. In order to make tapping screws to meet the requirements of the standard of mechanical properties and performance.
(3) The product surface hardness is high, the core toughness is good. That is, "soft inside strong outside". This is a major feature of tapping Screw performance requirements. If the surface hardness is low, it can not be screwed into the matrix; If the core toughness is poor, a twist will break, can not be used. So "inside soft outside steel" is self-tapping screw to meet the use of performance, very important requirements.
(4) The surface of the product needs surface protection treatment, generally electroplating treatment. Some product surface must be treated by phosphate (photostatting), such as wall panel self - tapping screws for photostatting.
(5) Production by cold heading process. It is recommended to use high-speed cold heading machine and high-speed wire rolling machine or high-speed planetary wire rolling machine. High speed is emphasized here to ensure product quality. Only the head of tapping screw produced by high-speed machine is well formed and the thread quality is high.
Round head Tapping screw,hex tapping screw,flat head tapping screw,pan head tapping screw,truss head tapping screw
Shenzhen Lanejoy Technology Co.,LTD , https://www.bbq-grillgrate.com