Whether in restaurants, hotels, supermarkets or in their own homes, especially on rainy days, the ground will become very slippery. Whether you are laying on the floor or the floor, there will be slippery soles. For children and the elderly, it is more likely to slip. What if the wooden floor is too slippery? What are the methods of anti-skid flooring? Today Xiao Bian came to share with you the knowledge of how to make the wooden floor too slippery . Let's learn about it together!
How to do if the floor is too slippery
First of all, we must first wipe or dry the water on the ground first, and put some carpets on the road we must pass or use frequently, which can increase the friction of the ground, but also can absorb some water. Or we could sprinkle some flour on the ground after cleaning last night and sprinkle the flour on the floor to sweep it off with a broom. At this time, some of the flour left on the floor will have a non-slip effect.
How to do if the floor is too slippery 2
If the floor of the dining area is very slippery, it is mostly due to dirt or oil on the floor. Then we can soak the mop in hot water, and then add the proper amount of detergent and alcohol, so that the oil on the ground can be subtle and clear. However, we should be able to dry the floor after cleaning. The dry ground is less likely to slip. Of course, we can also use some anti-slip agents.
How to do if the floor is too slippery
If there are conditions, of course, we can also put a layer of carpet on the floor of the home, you can shop in the entire house, you can also spread in more water, or in the aisle. Carpeting saves time and effort, but carpet floor mats are often very troublesome to clean. It is recommended that some darker carpets are more resistant to dirt, such as smoke gray, gray and so on.
How to do if the floor is too slippery 4
Because we usually wax the ground, if the floor has residual wax, then we should use wax water to remove the wax, and then clean the ground. Then apply a layer of anti-skid fluid, but pay attention to be uniform when coating, to understand the liquid surface thickness and moisturizing time, such as the dry surface should be timely moisturizing. When you feel resistance, you can. The use of anti-slip agent is low in cost and easy to use. It can be completed in 10 minutes and has a long-lasting effect. Once applied, it can achieve a non-slip effect for 10 years. The only downside is that it needs a little maintenance.
Xiao Bian's words: There are some tiny dust on the surface when we are doing non-slip procedures, the surface is resolved, so that the ground looks beautiful and clean, but after a few weeks the dust reaccumulated, and the color will also Gradually return to the original state, we do not have to worry, this is a normal phenomenon. The above is the knowledge of Xiaobian and everyone to explain how to do the wooden floor is too slippery , and hope to give you some reference! More related content, you can pay attention to Qijia information, follow-up will present more exciting content!
How to do if the floor is too slippery
stainless steel commercial flat washers are used under bolt heads or nuts to increase the bearing surface area, or to offer protection so that the nut or bolt can be rotated without distortion of the bearing surface. Flat washers are also used to give tightness to a joint, to prevent leakage, and especially to distribute pressure under the head of a bolt or nut. Dimensional specifications are governed by ASME B18.21.1. Commercial flat washers generally have a larger outer diameter than SAE (Society of Automotive Engineers) flat washers, and can be utilized in nearly any application. stainless steel fasteners are commonly used in applications that require general atmospheric corrosion resist ance, such as chemical and food processing equipment. Stainless steel has a higher corrosion resistance than carbon steel.
Stainless Steel Washer,Ss Washer,Stainless Steel Square Washers,Black Metal Washers
Taizhou Hongchuang Hardware Co., Ltd. , https://www.jstaizhouhongchuang.com