GRP Winding Potable Water Pipe Fiberglass Tube

GRP Winding Potable Water Pipe Fiberglass tube

Main characteristics of this process are the following:

The Bell and Spigot joint is an integral part of the pipe
The cross winding allows enough flexibility in the design to specify pipe of any axial and hoop strength
The axial strength is normally higher than that of pipes produced with other processes
Pipe stiffness is not related to joint stiffness which in any case is higher than the pipe stiffness and guarantees a very stable joint practically without deformation
The pipe could be made with our without silica sand depending on the load conditions
Nominal Pressure Classes
Pipes and fittings are classified according to nominal pressure. Standard pressure classes are: 4, 6, 10, 16, 20 bars. Intermediate or higher-pressure classes can be provided depending on the design parameters and conditions.

Pipe Stiffness Classes
Pipes are also classified according to specific pipe stiffness. Standard stiffness classes are: 1250, 2500, 5000 and 10000 PA. Intermediate or higher stiffness classes are available on request or depending on the design conditions

GRP (Glass Reinforced Plastic) or FRP (Fiber Reinforce Plastic) piping systems are available in a variety of standard diameters ranging from 15mm to 4000 mm. Zhongyi FRP offers GRP (FRP) pipe and fittings to meet all national and international standards depending on the area and application. Combining the strength of GRP (FRP) and the chemical compatibility of plastics provides customers with a superior alternative to costly metal alloys and rubber-lined steel.
 
Application Areas
Due to their excellent properties, GRP (FRP) or dual laminate piping systems can be used perfectly in several environments. These include all kinds of underground piping systems designed according to ISO 14692, AWWA 45/  C950 and GB/T21238. Zhongyi FRP can also supply insulated piping systems for cooled water conduits used in tropical and subtropical regions or in cold environments. These include heat tracing to prevent the medium from freezing.        
GRP (FRP) or Dual laminate piping systems:
1.Cooling water GRP piping systems
2.Process GRP piping systems
3.Auxiliary GRP piping systems
4.Recirculation piping systems
5.Underground feeding GRP piping systems
 
Applications:
1.Chemical processing
2.Ship building
3.Flue gas desulphurisation
4.Fire fighting
5.Food processing
6.Water treatment
7.Water purification
8.Sewage treatment
 
The latest technologies are implemented in the production process at the Zhogyi FRP with the  ensuring high quality products.  Zhongyi FRP offers customers flexible and continuous service for turnkey projects or maintenance.
The specification of FRP pipe:
Diameter: DN10mm-4000mm
Pressure grade: 0.25MPa,0.6MPa,1.0MPa,1.6MPa,2.0MPa,2.5MPa
Length: 6m, 12m


Q&A

Q:Are you a trading company or a manufacture factory?
A: Our factory is one of the biggest FRP products manufacturer in China.

Q: Can your factory give us a best quotation?
A:Yes,we can.

Q: How about after-sales service?
A: 5 year free warranty, Lifetime technical service support.

Q: How can i install the production line and get a commissiong?
A: We may send our engineer for installation and commissioning, but relevant cost will be paid by you.


Typical Dimensions:    


                                                                                  











Engineering Mechanics Index of FRP/Composite Material (1)Remarks: The data in the table is the typical data

  GRP Winding Potable Water Pipe Fiberglass tube

Main characteristics of this process are the following:

The Bell and Spigot joint is an integral part of the pipe
The cross winding allows enough flexibility in the design to specify pipe of any axial and hoop strength
The axial strength is normally higher than that of pipes produced with other processes
Pipe stiffness is not related to joint stiffness which in any case is higher than the pipe stiffness and guarantees a very stable joint practically without deformation
The pipe could be made with our without silica sand depending on the load conditions
Nominal Pressure Classes
Pipes and fittings are classified according to nominal pressure. Standard pressure classes are: 4, 6, 10, 16, 20 bars. Intermediate or higher-pressure classes can be provided depending on the design parameters and conditions.

Pipe Stiffness Classes
Pipes are also classified according to specific pipe stiffness. Standard stiffness classes are: 1250, 2500, 5000 and 10000 PA. Intermediate or higher stiffness classes are available on request or depending on the design conditions

GRP (Glass Reinforced Plastic) or FRP (Fiber Reinforce Plastic) piping systems are available in a variety of standard diameters ranging from 15mm to 4000 mm. Zhongyi FRP offers GRP (FRP) pipe and fittings to meet all national and international standards depending on the area and application. Combining the strength of GRP (FRP) and the chemical compatibility of plastics provides customers with a superior alternative to costly metal alloys and rubber-lined steel.
 
Application Areas
Due to their excellent properties, GRP (FRP) or dual laminate piping systems can be used perfectly in several environments. These include all kinds of underground piping systems designed according to ISO 14692, AWWA 45/  C950 and GB/T21238. Zhongyi FRP can also supply insulated piping systems for cooled water conduits used in tropical and subtropical regions or in cold environments. These include heat tracing to prevent the medium from freezing.        
GRP (FRP) or Dual laminate piping systems:
1.Cooling water GRP piping systems
2.Process GRP piping systems
3.Auxiliary GRP piping systems
4.Recirculation piping systems
5.Underground feeding GRP piping systems
 
Applications:
1.Chemical processing
2.Ship building
3.Flue gas desulphurisation
4.Fire fighting
5.Food processing
6.Water treatment
7.Water purification
8.Sewage treatment
 
The latest technologies are implemented in the production process at the Zhogyi FRP with the  ensuring high quality products.  Zhongyi FRP offers customers flexible and continuous service for turnkey projects or maintenance.
The specification of FRP pipe:
Diameter: DN10mm-4000mm
Pressure grade: 0.25MPa,0.6MPa,1.0MPa,1.6MPa,2.0MPa,2.5MPa
Length: 6m, 12m


Q&A

Q:Are you a trading company or a manufacture factory?
A: Our factory is one of the biggest FRP products manufacturer in China.

Q: Can your factory give us a best quotation?
A:Yes,we can.

Q: How about after-sales service?
A: 5 year free warranty, Lifetime technical service support.

Q: How can i install the production line and get a commissiong?
A: We may send our engineer for installation and commissioning, but relevant cost will be paid by you.


Typical Dimensions: