1. Bearing: The shaft of the crusher bears the full load of the negative machine, so good lubrication has a great bearing on the bearing life. It directly affects the service life and operating rate of the machine. Therefore, the injected lubricating oil must be clean and the seal must be Good, the main oil filling place of the machine 1, rotating bearings 2, roll bearings 3, all gears 4, moving bearings, sliding planes.
2. Pay attention to whether the work of various parts of the machine is normal.
3. When the rotating gear is running, if there is impact noise, it should be stopped immediately and checked.
4. Newly installed tires are prone to loosening and must be checked frequently.
5. Pay attention to check the wear of the wearing parts and pay attention to replacing worn parts at any time.
6. If the bearing oil temperature rises, stop it immediately and check the cause to eliminate it.
7. The plane of the base of the movable device should be out of dust and other objects to prevent the movable bearing from moving on the base frame when the machine encounters unbreakable materials, resulting in serious accidents.
2. Pay attention to whether the work of various parts of the machine is normal.
3. When the rotating gear is running, if there is impact noise, it should be stopped immediately and checked.
4. Newly installed tires are prone to loosening and must be checked frequently.
5. Pay attention to check the wear of the wearing parts and pay attention to replacing worn parts at any time.
6. If the bearing oil temperature rises, stop it immediately and check the cause to eliminate it.
7. The plane of the base of the movable device should be out of dust and other objects to prevent the movable bearing from moving on the base frame when the machine encounters unbreakable materials, resulting in serious accidents.
BS 4346 Water Supply Fitting With Thread
Pvc Male Plug,Pressure Pvc Male Plug,Pvc Female Thread Tee,Water Supply Upvc Male End Cap
Zhejiang Huangyan Minghua Plastic Pipe Fitting CO.,LTD , https://www.pipefitting-mh.com