Don't be afraid, relax first, relax slowly, just for a while, just fine.
At 2:30 pm on December 1, 2012, in the operating room of Jining People's Hospital, Zhang Dafu wore surgical gowns and comforted the patients on the operating table.
On the operating table is a patient with a thyroid cyst, and surgery is urgently needed. The shadowless light was on, the operating room was quiet, the anesthesiologist, the electrocardiographer, and the nurse were busy preparing for the operation.
A bright, shadowless lamp shines through every corner of the operating table. Zhang Dafu walked to the operating table under the shadowless lamp, gently pressed the patient's neck with a lump, and then took out a thin needle and tested the pain in the anesthesia area.
Pain, is the upper pain or the lower part more painful?
Oh, pain... no pain, the patient answered with Dr. Zhang’s hand.
A few minutes later, the doctor used iodine to draw a line of incision in the mass area. The knife, the scorpion, the nurse on the side quickly handed over the corresponding surgical instruments. I saw that the doctor gently cut the incision about 4 cm in the lump area, and when it was 0.5 cm deep into the subcutaneous skin, a cyst of about 2 cm was highlighted. The scorpion, the knife, the doctor kept changing the surgical instruments, and the muscles of each layer were fixed with tweezers, and the knives were wound around the cyst to minimize the area of ​​the incision.
Under the shadowless lamp, the time passed by, the tiny sweat beads creeped over Zhang’s forehead, and the white surgical cap was wet, but he did not care. After all the surgery, one hour later, the cyst of about 2 cm in diameter was finally taken out, and the incision was carefully sewed. The operation is perfect.
Our products are produced strictly based on the national standards GBT12459-05, GB13401-05; Sinopec standards SH3408, SH3409;Thermal power standard D-GD87; American national standards ASME B16.9, ANSI B16.9, B16.28, B16.11 and Japan national standard JISB2312.
Name
Reducer
Material
Stainless Steel
ASTM A240 304 304L 316L 321 321H 347 347H 904L ASTM A789 S31803 S32205 S32750
Carbon Steel
ASTM A234 WPB A420 WP WPL6 A516 GR70 GR65 GR60 GR55 ISO3183/API 5L 6/X52 L415/X60 L450/X65 L485/X70
Alloy Steel
ASTM A335 P11 P22 SA387 GR.11 GR.22
Titanium
Gr1 Gr2 Gr3 Gr5 Gr7 Gr12
Copper/Brass
We can also produce according to customer`s requirements
Standard
ASME B16.9, ANSI B16.9, ASTM , JISB2312,DIN,BS, GBT12459-05, GB13401-05,GOST
ASME B16.9-2007,MSS SP 43-1991,MSS SP-75,ASTM B363
Size
1/2"-96" DN15-DN2400
Wall thickness
Sch5S, Sch10S, Sch40S, Sch80S
Sch10,Sch20,Sch30,STD,Sch40,Sch60,XS,Sch80,Sch100,Sch120,Sch140,Sch160,XXS,
Type
Butt welded or Seamless
Shape
Equal or Reducing
Product
1. Elbow L/R & S/R (45/90/180 DEG)
according to customer`s requirement can produce the other's degree, such as 22.5 degree 30 degree 60 degree etc.
2. Tee(Straight and Reducing)
3. Reducer(Concentric and Eccentric)
4. Cross
5. Cap(Round and Elliptical)
6. Stub End
Surface
Black painting ; Pickling ; Sand blasting
Certificate
ISO9001 ; ISO9001:2008
Package
Wood case or Wooden pallets or according to the customer's requirements.
Lead Time
Within 30 days or according to the customer's requirements.
MOQ
1 Piece
OEM
YES
Reducer Pipe Fitting,Eccentric Reducer,Concentric Reducer,Carbon Steel Reducer
Shijiazhuang Huize Pipe Fitting Co., Ltd. , http://www.huizegd.com